All Messages

Q: what is the maximum traveling speed of the laser head?

Asked by erik_eastwood on 2021-04-25 03:19:50

hansnl Fully depends on what you like to do with this, engrave ? Cut through ? Material properties ? Required quality of your engravings ? Laser head power ? Just maximum mechanical speed is pretty fast at least sufficient for most operations i use it for. Bye, Hans

2021-04-25 06:28:27 Helpful (0)
Submit
Answers (2)

Q: How do you pair the additional wireless chime? I can't figure it out

Asked by BG134735185 on 2021-04-10 04:56:56

hansnl In the Aiwit app , click sign (add device) and select the option to share by QR-code. This way it worked out for me. Adding a second DoorBell.To connect the optional wireless chime, is also described in the manual press the volume down button (becomes the Connect button) next press the doorbell button , and these devices are paired.Succes !

2021-04-10 07:26:20 Helpful (1)
Submit
Answers (5)

Q: What are two potentiometers for? What are they doing?

Asked by vaklev on 2021-03-30 03:34:03

hansnl The function of these potmeters are given in the specs 9: Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%), The left is the timer , the right the power output from your (rewinded microwave) transformer. I would like you to show a picture of my constructed welding transformer, but can upload this using this banggood reply page. Good luck! Hans

2021-03-31 10:37:17 Helpful (1)
Submit
Answers (3)

Q: Which transmitter should I use for the tyro 79?

Asked by Dan on 2021-01-19 06:52:07

hansnl The Eachine Tyro79 is just a 3" quadcopter frame , but yes you can use this Flysky i6X transmitter combined with the X6B Receiver. This receiver is small enough to build into the Eachine Tyro79 frame.

2021-01-19 08:25:32 Helpful (1)
Submit
Answers (1)

Q: In my country is ilegal the accelerator. Could it be disconected?

Asked by BG221910815 on 2021-01-01 05:33:11

hansnl Yes, you can disconnect the throttle hand grip wiring from the motorcontroller. Also remove this from your steer , or fix it by glue to prevent rotating - disable its usage. good luck !

2021-01-02 06:38:44 Helpful (0)
Submit
Answers (1)

Q: Does this device work okay with 230v outlets?

Asked by 0solar4 on 2020-11-27 06:42:21

hansnl Yes it does work perfectly on 230 Volts AC. bye, Hans

2020-11-27 08:16:17 Helpful (0)
Submit
Answers (3)

hansnl Was able to make it work using www.nvcnc.netforslashnvcm.html succes ! bye, Hans

2020-11-11 07:39:15 Helpful (1)
Submit
Answers (1)

hansnl You need both a rewinded Microwave transformer to provide welding current and a small transformer with an output of 8 - 10 V (150mA) AC for the operation of the timer and display board.

2020-10-03 07:36:57 Helpful (1)
Submit
Answers (2)

Q: How to I specify an Australian 3 pin plug?

Asked by Robin on 2020-09-25 06:27:39

hansnl I'm affraid you should order a EU power plug to Austalian socket type plug GOOGLE for this. Or cut off the EU plug, and mount a Australian plug instead. Even better mount a Australia power cord GOOGLE for this. Because the EU cord is very short ( ~ 1 meter ) i've changed my EU cord for a 2.5 meter cord.succes !

2020-09-25 06:46:58 Helpful (0)
Submit
Answers (1)