Banggood

Added: anti slip, buzzer, ufl connector, lollipop 3, adjustable ledbar, solderd the battery connector 90° (higlhly recommended), locked the spi antenna with tie rip and locked the other parts like the battery connector with tiny elastics. (I will add a xm plus soon to take advantage of the 200mW vtx.

Added: anti slip, buzzer, ufl connector, lollipop 3, adjustable ledbar, solderd the battery connector 90° (higlhly recommended), locked the spi antenna with tie rip and locked the other parts like the battery connector with tiny elastics. (I will add a xm plus soon to take advantage of the 200mW vtx.

Added: anti slip, buzzer, ufl connector, lollipop 3, adjustable ledbar, solderd the battery connector 90° (higlhly recommended), locked the spi antenna with tie rip and locked the other parts like the battery connector with tiny elastics. (I will add a xm plus soon to take advantage of the 200mW vtx.

The Tiny Hawk Freestyle 2 is honestly fantastic! Why is this an excellent quad for beginners and experienced alike? Well here are some of the pros and very few cons: Durability - this little quad can take a beating with no problem. The Avon props that come stock are highly durable. I have never broken one prop in spite of shooting a tiny gap and hitting a metal pole or accidentally hitting a tree at full force. The carbon fiber frame is excellent and you won’t have to worry if you are new and slam it into anything. Sound - The highly durable Avon props are also very quiet and won’t cause a lot of noise while you are whipping this quad around your yard. Additionally, the 7000kv motors while remaining quiet, have great punch. Beginner friendly - The factory tuning was surprisingly good. For anyone starting out this is a very gentle entry and you will have fun right away. There is also room for growth! So, once you start making progress you can make some easy adjustments on betaflight and still have a great time. Batteries: The 2 included batteries are easy to charge with the included charger so there’s a lot less stress than with the larger lipos. However, 2 batteries does not mean you can fly on just 1 battery. You will need to run both batteries simultaneously or make a PH 2.0 redundant pin with an old battery connector. Packaging: The little case was really nice. It will fit all the extra props, the 2 batteries (you are going to need to buy a lot more), a charger, spare hardware and if you remove the foam the quad will fit without removing the installed props (see picture). Room for Improvement: This is a massive improvement from THFS1. However, there is yet some room for improvements. Like the THFS1 you will need a beeper. without one finding the THFSII in y’all grass or brush can be a challenge. The diapole antenna is durable but pretty much garbage. So you can replace the vtx or for a little improvement you can solder in a better antenna.

The Tiny Hawk Freestyle 2 is honestly fantastic! Why is this an excellent quad for beginners and experienced alike? Well here are some of the pros and very few cons: Durability - this little quad can take a beating with no problem. The Avon props that come stock are highly durable. I have never broken one prop in spite of shooting a tiny gap and hitting a metal pole or accidentally hitting a tree at full force. The carbon fiber frame is excellent and you won’t have to worry if you are new and slam it into anything. Sound - The highly durable Avon props are also very quiet and won’t cause a lot of noise while you are whipping this quad around your yard. Additionally, the 7000kv motors while remaining quiet, have great punch. Beginner friendly - The factory tuning was surprisingly good. For anyone starting out this is a very gentle entry and you will have fun right away. There is also room for growth! So, once you start making progress you can make some easy adjustments on betaflight and still have a great time. Batteries: The 2 included batteries are easy to charge with the included charger so there’s a lot less stress than with the larger lipos. However, 2 batteries does not mean you can fly on just 1 battery. You will need to run both batteries simultaneously or make a PH 2.0 redundant pin with an old battery connector. Packaging: The little case was really nice. It will fit all the extra props, the 2 batteries (you are going to need to buy a lot more), a charger, spare hardware and if you remove the foam the quad will fit without removing the installed props (see picture). Room for Improvement: This is a massive improvement from THFS1. However, there is yet some room for improvements. Like the THFS1 you will need a beeper. without one finding the THFSII in y’all grass or brush can be a challenge. The diapole antenna is durable but pretty much garbage. So you can replace the vtx or for a little improvement you can solder in a better antenna.

The Tiny Hawk Freestyle 2 is honestly fantastic! Why is this an excellent quad for beginners and experienced alike? Well here are some of the pros and very few cons: Durability - this little quad can take a beating with no problem. The Avon props that come stock are highly durable. I have never broken one prop in spite of shooting a tiny gap and hitting a metal pole or accidentally hitting a tree at full force. The carbon fiber frame is excellent and you won’t have to worry if you are new and slam it into anything. Sound - The highly durable Avon props are also very quiet and won’t cause a lot of noise while you are whipping this quad around your yard. Additionally, the 7000kv motors while remaining quiet, have great punch. Beginner friendly - The factory tuning was surprisingly good. For anyone starting out this is a very gentle entry and you will have fun right away. There is also room for growth! So, once you start making progress you can make some easy adjustments on betaflight and still have a great time. Batteries: The 2 included batteries are easy to charge with the included charger so there’s a lot less stress than with the larger lipos. However, 2 batteries does not mean you can fly on just 1 battery. You will need to run both batteries simultaneously or make a PH 2.0 redundant pin with an old battery connector. Packaging: The little case was really nice. It will fit all the extra props, the 2 batteries (you are going to need to buy a lot more), a charger, spare hardware and if you remove the foam the quad will fit without removing the installed props (see picture). Room for Improvement: This is a massive improvement from THFS1. However, there is yet some room for improvements. Like the THFS1 you will need a beeper. without one finding the THFSII in y’all grass or brush can be a challenge. The diapole antenna is durable but pretty much garbage. So you can replace the vtx or for a little improvement you can solder in a better antenna.

The suitcase came a little smudged but it resolved quickly. It could come with more information to be able to do Biding with the command because I bought another drone of the same brand that comes with the command and had to get information from others to get it. I do not advise to purchase uncommanded drones normally called BNF Drones. It is only for those who already have other universal commands, or a great knowledge of them. The position of the elices is the one in the photos. It doesn't come with manual showing the placement of them.

A mala veio um pouco amassada mas resolveu-se rápido. Poderia vir com mais informação para poder-se fazer o Biding com o comando pois comprei um outro Drone da mesma marca que vem com o comando e tive que obter informações de outros para o conseguir. Não aconselho a comprar Drones sem comando normalmente chamados de Drones BNF. É só para quem já tem outros comandos universais,ou um grande conhecimento dos mesmos. A posição das elices é a que está nas fotos. Não vem com manual a mostrar a colocação das mesmas.

The suitcase came a little smudged but it resolved quickly. It could come with more information to be able to do Biding with the command because I bought another drone of the same brand that comes with the command and had to get information from others to get it. I do not advise to purchase uncommanded drones normally called BNF Drones. It is only for those who already have other universal commands, or a great knowledge of them. The position of the elices is the one in the photos. It doesn't come with manual showing the placement of them.

Super small copter with good power. The settings via Betaflight were also easy (FPV channel, assign switch etc. The flight times are also good about 4-5 minutes, so a 10 pack ordered from the URUAV 450mah and you have good time to stay in the air. However, the two preset Pid profiles were much too sluggish / too slow for my taste. Then I looked at YOU TUBE other pids with which I was then also satisfied. Delivery from CZ warehouse 5days.

Super kleiner Kopter mit guter Power. Die Einstellungen über Betaflight gingen auch leicht ( FPV Kanal, Schalter zuweisen usw. Die Flugzeiten sind auch gut ca. 4-5 Minuten, also noch ein 10er Pack von den URUAV 450mah bestellt und man ordentlich Zeit in der Luft zu bleiben. Die zwei voreingestellten Pid Profile waren für meinen Geschmack jedoch viel zu träge / zu langsam. Habe mir dann bei YOU TUBE andere Pids abgeschaut mit welchen ich dann auch zu frieden war. Lieferung aus dem CZ Lager 5Tage.

Super small copter with good power. The settings via Betaflight were also easy (FPV channel, assign switch etc. The flight times are also good about 4-5 minutes, so a 10 pack ordered from the URUAV 450mah and you have good time to stay in the air. However, the two preset Pid profiles were much too sluggish / too slow for my taste. Then I looked at YOU TUBE other pids with which I was then also satisfied. Delivery from CZ warehouse 5days.

package arrived in perfect order. I had gotten a bad battery in my kit though. the metal tabs that hold the plastic connector are missing so if you pull on the wires even slightly they pop out of the connector. so I have to buy more 1s batteries so I can fly it. The quad did bind to my controller just fine and it seems to be good to go. just need batteries to fly it 😢

package arrived in perfect order. I had gotten a bad battery in my kit though. the metal tabs that hold the plastic connector are missing so if you pull on the wires even slightly they pop out of the connector. so I have to buy more 1s batteries so I can fly it. The quad did bind to my controller just fine and it seems to be good to go. just need batteries to fly it 😢

package arrived in perfect order. I had gotten a bad battery in my kit though. the metal tabs that hold the plastic connector are missing so if you pull on the wires even slightly they pop out of the connector. so I have to buy more 1s batteries so I can fly it. The quad did bind to my controller just fine and it seems to be good to go. just need batteries to fly it 😢

This is my second purchase (^-^) I skipped 5 inches for the main, and I skipped 3 inches for the chopstick rest Do you have to buy a 2.5" machine because it's hard to enjoy less than two inches? I was worried So cute and cool! Just buy tinyhawk2freestyle (just like) w It's worse than the 2.5-inch plane I built myself It's very light. It's a little 80g with a battery I felt the potential (although I am a beginner amateur w) I'm honestly disappointed if I do nothing and fly it straight It's a freestyle plane, but is it an aerial? That's a very relaxing feeling When the distance is about 100 meters away, the binding is broken suddenly and the VTX is disturbed It's a toy if you stay in stock But it's a big change in receiver addition, Bataflight configuration change, prop exchange, and VTX antenna transfer or replacement Honestly, I feel underpowered, but I'm sure it'll be a pretty enjoyable aircraft The first VTX antenna was thick and long, so I changed the tie lap to the right back and installed it obliquely on the tail side, but this alone changed dramatically and improved The second one was a thin and short type, so I changed it to lollipop 3 The rest will be the aircraft that you can enjoy with the Bataflight Rate change and the 2540-3 prop (^-^) I liked the first one and bought the second one w It's easy to get 1S2, and nano2 meets the minimum VTX200mW is good if antenna is moved or replaced (^-^) But custom has limitations, the motor is 1103, but it can't be changed because it's three screws At most, about a 7500kv motor on a tinyhawk2Racer? Is that right? The FC cannot be changed if the mounting hole is unique and the hole cannot be drilled The first camera was also processed and equipped with RunCam phoenix2nano, but I think it is unlikely that it can be changed if it is not processed I'm trying to order RunCam nano4 It's possible to change nano4, but I wonder if it's necessary because it's not much different in performance There are also cons, but overall it is well done and I wonder if it is recommended (^-^)

2機目の購入です(^-^) 私はメインは5インチを飛ばして 箸休め的に3インチを飛ばしてて 2インチ以下はなかなか楽しくなれず 2.5インチ機を買う必要あるか？と悩みましたが 可愛くてカッコいい！ってだけ(ただの好み)でtinyhawk2freestyleを購入w 自分でビルドした2.5インチ機より飛びは悪いですが この機体 めっちゃ軽いです バッテリー込みで80g少々 ポテンシャルを感じました(初心者素人ですがw) 何もせずそのまま飛ばすと 正直がっかりします 成りはfreestyle機ですが空撮機？ってくらいのゆったり感 100mくらい離れるといきなりのバインド切れとVTXの電波障害 ストックのままならオモチャですw ですがレシーバー追加とbataflightの設定変更とプロップ交換 それとVTXのアンテナ移設もしくは交換で激変し 正直パワー不足は感じますが かなり楽しめる機体になります 1機目はVTXアンテナが太く長いタイプだったので タイラップを右後ろに変更しテール側に斜めに設置しましたが これだけでも激変し良くなりました 2機目は細く短いタイプだったのでlollipop3に変更してしまいました あとはbataflightでRate変更と2540-3プロップの使用で楽しめる機体になります(^-^) 1機目で気に入ってしまい 2機目を購入してしまいましたw 1S2本ってのも気楽でいいし nano2ってのも必要最低限を満たしてるし アンテナ移設or交換すればVTX200mWってのもいいですね(^-^) ただ カスタムには限界があり モーターは1103ですがビス3本タイプなので変更はできません せいぜいtinyhawk2Racerの7500kvのモーターくらい？ですかね？ FCはマウント穴が独特なため穴開け加工が出来ない方には変更は不可能です カメラも1機目は加工してRunCam phoenix2nanoを搭載しましたが 無加工ならば変更できる可能性は低いように思います 今 試しにとRunCam nano4を発注してます nano4なら変更できそうですが 性能的には大差ないので必要かは疑問w 短所もありますが 全体的には良くできており お薦めできる機体ではないでしょうか(^-^)

This is my second purchase (^-^) I skipped 5 inches for the main, and I skipped 3 inches for the chopstick rest Do you have to buy a 2.5" machine because it's hard to enjoy less than two inches? I was worried So cute and cool! Just buy tinyhawk2freestyle (just like) w It's worse than the 2.5-inch plane I built myself It's very light. It's a little 80g with a battery I felt the potential (although I am a beginner amateur w) I'm honestly disappointed if I do nothing and fly it straight It's a freestyle plane, but is it an aerial? That's a very relaxing feeling When the distance is about 100 meters away, the binding is broken suddenly and the VTX is disturbed It's a toy if you stay in stock But it's a big change in receiver addition, Bataflight configuration change, prop exchange, and VTX antenna transfer or replacement Honestly, I feel underpowered, but I'm sure it'll be a pretty enjoyable aircraft The first VTX antenna was thick and long, so I changed the tie lap to the right back and installed it obliquely on the tail side, but this alone changed dramatically and improved The second one was a thin and short type, so I changed it to lollipop 3 The rest will be the aircraft that you can enjoy with the Bataflight Rate change and the 2540-3 prop (^-^) I liked the first one and bought the second one w It's easy to get 1S2, and nano2 meets the minimum VTX200mW is good if antenna is moved or replaced (^-^) But custom has limitations, the motor is 1103, but it can't be changed because it's three screws At most, about a 7500kv motor on a tinyhawk2Racer? Is that right? The FC cannot be changed if the mounting hole is unique and the hole cannot be drilled The first camera was also processed and equipped with RunCam phoenix2nano, but I think it is unlikely that it can be changed if it is not processed I'm trying to order RunCam nano4 It's possible to change nano4, but I wonder if it's necessary because it's not much different in performance There are also cons, but overall it is well done and I wonder if it is recommended (^-^)

Great little quad. F411 board - Nano 2 - TH1103 7000KV - 5A BlHeli_S - 25/100/200mW - SPI RX There are extra props & a little bag of prop bolts & a couple of spare parts (not many) & a USB charging board. Will take latest BetaFlight To bind to integrated rx, use BF CLI command - bind_rx_spi Had to reposition the FPV antenna so it was a little higher, still not high enough to clear the battery. Arm guards & battery holder from Thingiverse & remixed to include antenna holders. Plenty of reviews on YouTube. This is my 3rd Emax Baby/Tiny Hawk quad, they are all fantastic out of the box!

Great little quad. F411 board - Nano 2 - TH1103 7000KV - 5A BlHeli_S - 25/100/200mW - SPI RX There are extra props & a little bag of prop bolts & a couple of spare parts (not many) & a USB charging board. Will take latest BetaFlight To bind to integrated rx, use BF CLI command - bind_rx_spi Had to reposition the FPV antenna so it was a little higher, still not high enough to clear the battery. Arm guards & battery holder from Thingiverse & remixed to include antenna holders. Plenty of reviews on YouTube. This is my 3rd Emax Baby/Tiny Hawk quad, they are all fantastic out of the box!

Great little quad. F411 board - Nano 2 - TH1103 7000KV - 5A BlHeli_S - 25/100/200mW - SPI RX There are extra props & a little bag of prop bolts & a couple of spare parts (not many) & a USB charging board. Will take latest BetaFlight To bind to integrated rx, use BF CLI command - bind_rx_spi Had to reposition the FPV antenna so it was a little higher, still not high enough to clear the battery. Arm guards & battery holder from Thingiverse & remixed to include antenna holders. Plenty of reviews on YouTube. This is my 3rd Emax Baby/Tiny Hawk quad, they are all fantastic out of the box!

A really great starter drone. It is well assembled and very well furnished (Betaflight). After I had connected my own S-bus receiver the Tinyhawk could also communicate with my Taranis X9D+ 2019 SE in the D16 mode. The flight times are completely ok. Depending on how your own flight handle is, you can fly between 3-5 minutes. The RunCam Nano 2 provides a good picture to the glasses or monitor. Since only one simple VTX antennas was installed, the range is small but quite sufficient for this size. I had to update the firmware since the very first version was still on the chip. But went without any major problems. And last but not least, a battery was broken. Banngood reacted superbly.

Eine wirklich super Einsteiger Drohne. Sie ist gut zusammengebaut und sehr gut eingerichtet (Betaflight). Nachdem ich meinen eigenen S-Bus Empfänger angeschlossen hatte konnte die Tinyhawk auch mit meiner Taranis X9D+ 2019 SE im D16 mode Kommunizieren. Die Flugzeiten sind völlig ok. Je nachdem wie der eigen Flug-Stiel ist kann man zwische 3-5 Minuten fliegen. Die RunCam Nano 2 liefert ein gutes Bild an die Brille oder Monitor. Da aber nur einer einfache VTX Antennen verbaut wurde ist die reichweite gering aber völlig ausreichend für diese Größe. Ich musste die Firmware updaten da noch die aller erste Version auf dem Chip war. Ging aber ohne größere Probleme. Und zu guter letzt war ein Akku defekt. Banngood hat aber super reagiert.

A really great starter drone. It is well assembled and very well furnished (Betaflight). After I had connected my own S-bus receiver the Tinyhawk could also communicate with my Taranis X9D+ 2019 SE in the D16 mode. The flight times are completely ok. Depending on how your own flight handle is, you can fly between 3-5 minutes. The RunCam Nano 2 provides a good picture to the glasses or monitor. Since only one simple VTX antennas was installed, the range is small but quite sufficient for this size. I had to update the firmware since the very first version was still on the chip. But went without any major problems. And last but not least, a battery was broken. Banngood reacted superbly.

Product arrived in 15 running days, still haven't been able to test however the quality is excellent. It was missing the small Phillips key but it was possible to assemble the propellers with another key that I had. It is quite difficult to disconnect the battery from the drone, it may be because the fitting is very well done, which ensures more safety in case there are crashes during flight. Other than that, I have no more complaints.

Produto chegou em 15 dias corridos, ainda não pude testar porém a qualidade é excelente. Veio faltando a chave Phillips pequena mas foi possível realizar a montagem das hélices com outra chave que eu tinha. É bem difícil desconectar a bateria do drone, pode ser porque o encaixe é muito bem feito, o que garante mais segurança caso haja batidas durante vôo. Fora isso, não tenho mais reclamações.

Product arrived in 15 running days, still haven't been able to test however the quality is excellent. It was missing the small Phillips key but it was possible to assemble the propellers with another key that I had. It is quite difficult to disconnect the battery from the drone, it may be because the fitting is very well done, which ensures more safety in case there are crashes during flight. Other than that, I have no more complaints.

It is a very versatile drone , highly recommended to start in the FPV, I am initiating and decided to acquire it because of the good opinions it has. It is a very good drone, the improved camera makes the handling much more comfortable, so all this combined with a good control make your kit, the perfect group to start. The drone is well assembled, so you only need to put the propels and connect the batteries to start flying. The frame looks pretty good and I consider it very resistant to the first strokes from which a beginner like me does not escape. In this sense I would recommend it without problem. although for its cost you could find bigger drones, but not with the same quality of components, it is for this and for the improvements that it has to itself before this that I highly recommend it. The laque consists of a pair of propels, two batteries, charger and the drone with its counting card, as well as some stickers already very own in this type of devices. The mini briefcase is much appreciated, which helps you to transport it without problem, either in a backpack or in a travel suitcase, it comes padded so it offers a very good protection for the drone. As far as shipping was concerned it was quite good, I arrived in the estimated time of delivery and the package was stopped without any problem, inside it everything arrived quite well without damage and everything very well packed. Now I am waiting for a check and I hope the shipment will be just as efficient. In conclusion: the drone is a very good option for those who start out in the FPV world as well as me, as well as for those who are looking for a drone of a good quality and are willing to pay a little more for a drone of that size. Highly recommended!

Es un dron bastante versátil , muy recomendando para comenzar en los FPV, yo estoy iniciando y decidí adquirirlo por las buenas opiniones que tiene. Es un muy buen dron, la cámara mejorada hace que el manejo sea mucho más cómodo, por lo cual todo ello combinado con un buen mando hacen de tu kit, el grupo perfecto para iniciar. El dron bien ensamblado por lo cual solo es necesario poner las propelas y conectar las baterías para poder empezar a volar. El marco se ve bastante bien y considero que es muy resistente a los primeros golpes de los cuales no se escapa un principiante como yo. En este sentido lo recomendaría sin problema. aunque por su costo podrías encontrar drones más grandes, pero no con la misma calidad de componentes, es por ello y pos las mejoras que tiene a sí antes esto que lo recomiendo ampliamente.El laque consta de un par de propelas, dos baterías, cargador y el dron con su tarjeta conteoladora, así como de unas pegatinas ya muy propias en este tipo de dispositivos. Se agradece mucho el mini maletín, el cual te ayuda a transportarlo sin problema, ya sea dentro de una mochila o en una maleta de viaje, este viene acolchado por lo cual ofrece una muy buena protección para el dron. En lo que respecta al envío fue bastante bueno, llego en el tiempo estimado de entrega y el paquete se cesó sin ningún problema, al interior del mismo todo llegó bastante bien sin daños y todo muy bien empacado. Ahora me encuentro a la espera de un control y espero el envío sea igual de eficiente. En conclusión: el dron es una muy buena opción para quien empieza en el mundo de los FPV así como yo, así como para quien busque un dron de una buena calidad y esté dispuesto a pagar un poco más por un dron de esas dimensiones. Muy recomendado!

It is a very versatile drone , highly recommended to start in the FPV, I am initiating and decided to acquire it because of the good opinions it has. It is a very good drone, the improved camera makes the handling much more comfortable, so all this combined with a good control make your kit, the perfect group to start. The drone is well assembled, so you only need to put the propels and connect the batteries to start flying. The frame looks pretty good and I consider it very resistant to the first strokes from which a beginner like me does not escape. In this sense I would recommend it without problem. although for its cost you could find bigger drones, but not with the same quality of components, it is for this and for the improvements that it has to itself before this that I highly recommend it. The laque consists of a pair of propels, two batteries, charger and the drone with its counting card, as well as some stickers already very own in this type of devices. The mini briefcase is much appreciated, which helps you to transport it without problem, either in a backpack or in a travel suitcase, it comes padded so it offers a very good protection for the drone. As far as shipping was concerned it was quite good, I arrived in the estimated time of delivery and the package was stopped without any problem, inside it everything arrived quite well without damage and everything very well packed. Now I am waiting for a check and I hope the shipment will be just as efficient. In conclusion: the drone is a very good option for those who start out in the FPV world as well as me, as well as for those who are looking for a drone of a good quality and are willing to pay a little more for a drone of that size. Highly recommended!