All Messages

Q: does each quadcopter have it's own battery

Asked by chocksaway on 2017-11-08 02:17:36

BG419411481 it's ok . nevermind

2020-11-27 11:41:14 Helpful (0)
Submit
Answers (2)

chocksaway I would assume your government has made importation of such devices ILLEGAL. Most people are aware that governments make laws and should you decide to break those laws you face the consequencies, Jail, Fines and confiscation or all three.

2020-11-10 08:35:27 Helpful (0)
Submit
Answers (2)

chocksaway Isn't it rather obvious that importing illegal radios into your country means you shouldn't be doing it? If it's found by customs, you could face a fully supplied holiday in a prison resort. If it gets through customs and you use it, you can be tracked very easily and again go to jail, get a heavy fine and have your radios confiscated. I would take your governments advice and DON'T USE IT.

2020-11-10 08:26:40 Helpful (1)
Submit
Answers (2)

Q: Out put power is 8 W. Really?

Asked by Aung Yair Yint Thura Zaw on 2019-12-06 10:00:13

chocksaway The output with a fully charged and healthy battery may give you 5 watts if you are lucky, You'd be far better off buying a much better antenna to suit the frequency you wish to use. Expecting full output and good reception from the supplied antenna on all available frequencies is an impossibility. Please don't forget unless you're licenced for the available frequencies, you can face jail time, a heavy fine and confiscation in most countries. If you still want to use the readio with no licence I suggest you do so at least 20 miles from any town or city. You can be tracked very easily.

2020-11-10 08:18:51 Helpful (0)
Submit
Answers (2)

chocksaway You require a licence to operate this radio. Even though part of the UHF band can be used in Australia, this radio is definitely not usable. I suggest you Google (search) for regulations in whichever country you wish to use these in. Use these in America, UK or Australia on any frequency can lead to heavy fines and confiscation of the radios and accessories. In some cases jail time can be a reality. Ham radio operators monitor and use many of this radio's frequencies and can and will report you to the authorities. Please note, Ham Operators run competitions in tracking radios using Ham Bands and many Government agencies use many frequencies on these radios, so be very careful. You can be tracked.

2020-11-10 08:07:15 Helpful (0)
Submit
Answers (2)

chocksaway You require a licence to operate this radio. Even though part of the UHF band can be used in Australia, this radio is definitely not usable. I suggest you Google (search) for regulations in whichever country you wish to use these in. Use these in America, UK or Australia on any frequency can lead to heavy fines and confiscation of the radios and accessories. In some cases jail time can be a reality. Ham radio operators monitor and use many of this radio's frequencies and can and will report you to the authorities. Please note, Ham Operators run competitions in tracking radios using Ham Bands and many Government agencies use many frequencies on these radios, so be very careful. You can be tracked.

2020-11-10 07:25:08 Helpful (0)
Submit
Answers (9)

chocksaway You require a licence to operate this radio. Even though part of the UHF band can be used in Australia, this radio is definitely not usable. I suggest you Google (search) for regulations in whichever country you wish to use these in. Use these in America, UK or Australia on any frequency can lead to heavy fines and confiscation of the radios and accessories. In some cases jail time can be a reality. Ham radio operators monitor and use many of this radio's frequencies and can and will report you to the authorities. Please note, Ham Operators run competitions in tracking radios using Ham Bands and many Government agencies use many frequencies on these radios, so be very careful. You can be tracked.

2020-11-10 07:21:41 Helpful (0)
Submit
Answers (2)

chocksaway Sadly thay's the way Chinese on-line retailers work. Tracking is useless, often there's no tracking even though you've paid for it. My method of tracking was, "when it landed at my front door, it had arrived". I gave up buying here after spending thousands of dollars. Let's say I wouldn't trust 9.10th's of what they say and I doubted the other 1.10th.

2020-11-06 05:12:35 Helpful (0)
Submit
Answers (3)

helgjohn As far as I know it only works in simple mode No touch screen on stock board, and to use the touch screen option you need to up grade mother board. The stock mother board is so tailor made for its use that custom is not an thing here. There is no differ regards to stock mother board on Ender 3 or the E 3 pro version. so same limits and issues regarding programming Hardware and so on are at play. One way to get all or more options out of your printer is replace mother board, there are several alternativs from BTT or MKS that will work both better and give you more options and a silent printer......... MKS is a bit cheaper price wise than BTT but are basically the same. I have several bords running on my printers from MKS and BTT and they work fine. The mother boards I have found works best is MKS Robin E3D 32Bit - MKS SGEN L 32-Bit ARM Cortex-M3 - MKS SGen_L V2.0 32Bit or the BTT SKR V1.3 - skr 1.4 - skr 1.4 turbo Control Board 32 Bit ARM CPU 32bit. Whit tmc 2209 or 2208 drivers The price for full packet is somewhere between 190 to 350 us dollar pending on where you buy.....

2020-08-19 07:10:36 Helpful (2)
Submit
Answers (4)

SorinB At first, the size. Another difference is that the TFT35 V3.0 has a dedicated header for WiFi module and the EXP 3 header for CR10 mainboard connection using only one cable.

2020-08-19 08:25:08 Helpful (0)
Submit
Answers (1)

chocksaway Stupid answer, "You can scale it as you want it" Rubbish, it's made to be a specific size and that's it. Unless of course you wish to make it smaller. I'm building my own box made from PVC electrical tubing. All up cost.around $100 USD. I anyone hasn't noticed this thing is overbuilt to blazes. 6 pieces of metal are redundent (not needed), unless the builder intends to stand on the damned thing.

2020-05-08 02:16:03 Helpful (0)
Submit
Answers (4)

chocksaway Sadly the thermometers in these clocks and other like it aren't known for their accuracy. I had 7 of them running on my bench and all bar 2 had different temperatures and those 2 were wrong. The best way to check them is to place the back of your hand on the clock's case and if it feels cold the temperature will be low. The opposite if it feels hot. If you're sweating it should read higher. Sorry, couldn't resist.

2020-04-06 08:48:50 Helpful (0)
Submit
Answers (3)

chocksaway BangGood doesn't supply them ready built, but I'll give you the same offer as another buyer. If you live in Australia, send me 3 clocks, I will build two for yourself and post them to you. My payment will be the extra clock. I'm retired now, but when I was working I was earning $125 an hour, so I'm taking a big pay cut :-) By the way, I'm 71, a returned serviceman, disabled and own my own home, I will not do a runner with your clocks. It'll take at least $1,500,000 to get me to take off and then it'll be in my wheelchair. I will give you my home phone number and address for your peace of mind.

2020-04-06 08:42:22 Helpful (0)
Submit
Answers (1)

chocksaway Definitely sounds like a bad solder joint.

2020-04-06 08:31:56 Helpful (0)
Submit
Answers (2)

Q: can i buy the clock ready made? i will pay extra (not too much tho)

Asked by rauri51489 on 2018-11-07 10:22:33

chocksaway Wgere do you live? If you're an Aussie asl BangGood to send the kit to me and I'll send it on whan it's built. I can just about build them in my sleep. Everyone who visired home wanted one. I'm too soft to say no. If you wish to pay a little and for shipping it on, send me three. I'll build two and post them to you. Unfortunately shipping elsewhere in the world will be more than you pay for the clock.

2020-04-06 08:29:21 Helpful (0)
Submit
Answers (2)