GunnarF
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

GunnarF 03/01/2022
Ok as a BT headset , it's good for the money, nothing to write home about though ... However, hook these up to a dac and boy do these come alive! The bass vibrates my vision and i feel the bass in all my face , it's very nice ! If you plan on using these with a dac, i think for the price, these are hard to beat , specially the bass ( i also have JBL BT700, Pioneers DEH800, Sennheiser Urbanites and Sennheiser Game Zeros for comparison ) Only downside I think is the build quality, but hard to expect more for this money
BlitzWolf® BW-HP2 bluetooth V5.0 Headphone Wireless Headset 50mm Driver 1000mAh Touch Control Foldable Over-Ear Gaming Headset with Mic
US$39.90 US$45.99
0
Recommendations
Comments (0)
1200W Double Chips LED Grow Light Full Spectrum Grow Lamp for Greenhouse Hydroponic Indoor Plants
US$168.29 US$195.99

Q: 240W power draw and you say "1200W LED lamp" .. could you explain how that would work ?

Asked by GunnarF on 2018-03-30 11:19:04

Bulltac its just an equivalency rating vs old school HPS lights. It means you get 1200W worth of light but only draws 240W vs its older non-LED counterparts

2020-08-06 02:31:37 Helpful (1)
Submit
Answers (4)
GunnarF 13/12/2019
Not much to say about these, just led diodes and they work as one would expect them to work
100PCS 5MM 20mA Transparent Round Ultraviolet 395nm 400nm UV Purple 2Pin LED Diode DIY Light
US$13.59 US$15.86
0
Recommendations
Comments (0)
GunnarF 15/02/2019
The handle is good and works fine, however the long pin used for a handle is just a plain pin in a hole, so it's easy to lost it .. The bits "work" at least for aluminium , however they are not properly hardenend steel bits .. A simple "file test" on the bits shows that they are very soft specially if you compare them with a proper bit.. However i mainly bought this for the handle and the bits are more "extra" for me, but for 7$ i did not expect proper hardenend steel .. For a few holes, they would do just fine.. but if you are gonna tap alot of holes, use the handle but get a proper bit
Drillpro T Handle Ratchet Tap Wrench with 5pcs M3-M8 Machine Screw Thread Metric Plug Tap
US$6.36 US$17.99
0
Recommendations
Comments (0)
Andonstar ADSM201 1080P Full HD USB Microscope Magnifier Long Object Distance Microscope
US$208.20 US$238.99

Q: is it CE certified?

Asked by GunnarF on 2017-11-19 04:06:24

Faye It is CE certified.

2017-11-27 02:51:34 Helpful (0)
Submit
Answers (1)

GunnarF actually, smaller layers makes weaker parts .. So if you are going for stronger stiffer parts, get a 0.6 or 0.8mm and print with 0.3 - 0.5mm layers :)

jernejkrc 27/12/2018
I bought a Titanium nozzle of diameter 0.3 mm for my 3D printer Creality CR-10S and is very good quality build. There is a difference in 3d prints with 0.3 mm nozzle compare with 0.4 mm: - the surfaces of the models are smoother and - the hardness of the model increases.
0.3mm/0.4mm/0.6mm/0.8mm/1.0mm Titanium Alloy M6 Thread Nozzle for 3D Printer
US$5.36 US$8.99
0
Comments (1)
GunnarF 10/12/2018
Nice screwdrivers .. They come in a ok box , have a very nice pouch.. Good selection of bits.. However the the finish on the main screwdriver thing and the tweesers is a bit lacking , making them look rather cheap (have scratches and uneven edges that have not been finished) .. The magnetic thing on the bits is very weak, it can bearly pick up a very small screw.. I would rate this 6.5 / 10
JIMI 30 IN 1 Multi-purpose Precision Screwdrivers Kit Repair Tool DIY Screw Driver Set w/ Tweezers
US$24.09 US$43.44
0
Recommendations
Comments (1)
GunnarF 13/09/2018
work as expected .
20pcs RGB LED Diode 8mm Red/Green/Blue 4 Pin Light Emitting Diode
US$5.69 US$6.99
0
Recommendations
Comments (0)
GunnarF 13/09/2018
Nice boards, good to have couple of these on hand for hobby projects
10pcs 5X10cm Single Side Copper Prototype Paper PCB Breadboard 2-3-5 Joint Hole
US$4.79 US$10.99
0
Recommendations
Comments (0)
GunnarF 13/09/2018
Parts are expected , look and function fine..
10pcs DC-022 5.5-2.1mm Round Hole Screw Nut DC Power Socket ROHS Internal Diameter 5.5mm
US$5.99 US$3.19
0
Recommendations
Comments (0)
GunnarF 13/09/2018
So i ordered 2 of these "flood lights" .. It does not look half bad from the outside, has a thin metal fram around it that seems strong enough for it's purpose , it has some kind of black coating on it that has a bit rough finish and looks nice... But then you open the thing up ... ouch .. There are 3 skrews that are used to hole the LED down to the heatsink, they were all loose cause the holes are not thredded so the screws basicly just lay there.. The heatsink it self is a small 2mm or so metal plate that just lays in the bottom, and just wiggles around cause its not bolted or glued to anything, and finally there is thermal paste all over the place :) But at least they used some... Personally, my interest was in the frame cause I have other LEDs that i wanna try to put inside and see how they are with the lens and things like that , but if you are thinking about buying these and use them as they come, I would not think thats a good idea.. At least take it apart and make sure everything is good and if not, fix the issues before using it
AC170-265V/AC110V 30W/50W IP65 Waterproof Ultra Thin LED Flood Light for Outdooor
US$25.18 US$40.99
1
Recommendations
Comments (1)
GunnarF 10/07/2018
ok
2x3W Micro USB Wireless bluetooth Speaker Audio Receiver Digital Amplifier Board 5V
US$2.99 US$13.99
0
Recommendations
Comments (0)
GunnarF 10/07/2018
Very very poor quality, all plastic and you have to put the headphone really gently on this so you will not break it , it's not even worth 2$..
Universal Aluminum Alloy Lightweight Headphone Stand Headset Holder Earphone Stand Bar Mount
US$14.68 US$20.99
2
Recommendations
Comments (1)

GunnarF Wood filaments are my fav. to print with cause of the awesome smell :)

PaulR 26/01/2018
Was curious to test this filament for quite some time, and I must say it is better than I expected. Print's very easy and as you can see in the pictures, the first print with this filament that actually contains wooden sawdust is simply adorable! The wooden smell during printing is kinda confirming that there is real wood inside! Strongly recommend this filament! Thank You Banggood!
1.75mm 0.5kg/1kg Wood Color PLA Filament For 3D Printer RepRap
US$51.24 US$55.89
7
Comments (2)
GunnarF 12/03/2018
Well there were 10 in the bag like expected, and the chips look like in the picture so pretty happy with this
10pcs NE555 NE555P NE555N 555 Timers DIP-8 TEXAS IC
US$1.59 US$4.99
0
Recommendations
Comments (0)
GunnarF 12/03/2018
I've owned a few grineder over the years , decided to order one of these just cause they were on sale, and I have to say that im very happy with it ! Looks very nice, good finish, not a sharp edge on the thing, except the teeth that are quite sharp.. Just dont think you could buy a nicer grinder at this price range or even if you add 10-20$
KC-XS02 Four Piece Forage Herb Grinder Metal Spice Crusher Zinc Alloy Pollen Catcher
US$10.99 US$14.99
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe