FML
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

FML 20/03/2021
I bought two MT-8 kits with the CNC upgrades. One to drive and another a few months later as a spare part dispenser. When disassembling the second MT-8, I noticed very negatively that way too much loctite was used. I didn't get some screws loosened and damaged my tool in the process. I had to drill out the screws. The lower suspension brackets (8045 + 8046) were then destroyed. Too much loctite was also used on the c-mounts (8134) and in the hex wheel hub mounts (8086). The screws can only be loosened with very massive screwdrivers. The seal (8265) for the receiver box was missing in both kits. I have installed a 1950 Kv Surpass Taurus 4274 bruhless motor with the standard 13T gear (8195) and standard 48T spur gear (8473) on my MT-8. I recommend installing the stronger motor base (8487). From a 3S Lipo the MT-8 is already quite fast. With a 4S Lipo, wheelies are no problem and the MT-8 becomes a projectile that hardly brings the engine power to the road. The MT-8 then flies over the area and is difficult to control. The construction then reaches its limit. Because of the large wheels, I recommend a powerful 35 kg servo. I also recommend installing the front bumper (8481) and the rear wheel (8482). The front bumper can be upgraded with LEDs. I have a lot of fun with the car, but I would like a little more care when assembling it in the factory. And please don't use so much loctite anymore.
ZD Racing 9116 1/8 4WD Brushless Electric Truck Metal Frame 100km/h RC Car Without Electric Parts
US$234.99 US$278.99
22
Recommendations
Comments (10)
FML 27/02/2021
Powerful servo at a low price. I use the servo in a 1/8 off-road RC car. I can recommend the servo.
SPT Servo SPT5435LV-180W 35KG Large Torque Waterproof Metal Gear Digital Servo For RC Robot RC Car
US$17.61 US$26.99
1
Recommendations
Comments (0)

FML Thank you for your help. Next time i will heat the screws.

FML 20/03/2021
I bought two MT-8 kits with the CNC upgrades. One to drive and another a few months later as a spare part dispenser. When disassembling the second MT-8, I noticed very negatively that way too much loctite was used. I didn't get some screws loosened and damaged my tool in the process. I had to drill out the screws. The lower suspension brackets (8045 + 8046) were then destroyed. Too much loctite was also used on the c-mounts (8134) and in the hex wheel hub mounts (8086). The screws can only be loosened with very massive screwdrivers. The seal (8265) for the receiver box was missing in both kits. I have installed a 1950 Kv Surpass Taurus 4274 bruhless motor with the standard 13T gear (8195) and standard 48T spur gear (8473) on my MT-8. I recommend installing the stronger motor base (8487). From a 3S Lipo the MT-8 is already quite fast. With a 4S Lipo, wheelies are no problem and the MT-8 becomes a projectile that hardly brings the engine power to the road. The MT-8 then flies over the area and is difficult to control. The construction then reaches its limit. Because of the large wheels, I recommend a powerful 35 kg servo. I also recommend installing the front bumper (8481) and the rear wheel (8482). The front bumper can be upgraded with LEDs. I have a lot of fun with the car, but I would like a little more care when assembling it in the factory. And please don't use so much loctite anymore.
ZD Racing 9116 1/8 4WD Brushless Electric Truck Metal Frame 100km/h RC Car Without Electric Parts
US$234.99 US$278.99
22
Comments (10)
ZD Racing 8041 Front Lower Arm For 1/8 9116 RC Car Parts
US$5.87 US$10.99

Q: is this for the front and the rear?

Asked by BG815152383 on 2021-08-09 01:33:03

FML for the front

2021-08-11 02:47:15 Helpful (0)
Submit
Answers (4)
ZD Racing 9116 1/8 4WD Brushless Electric Truck Metal Frame 100km/h RC Car Without Electric Parts
US$234.99 US$278.99

Q: Can this use a 4274 motor? So a 42mm diameter?

Asked by BG471115169 on 2021-06-09 04:53:56

FML YES, a 4274 Motor fits perfectly. There is enough space.

2021-06-14 03:24:54 Helpful (0)
Submit
Answers (4)
FML 20/03/2021
Attention there are two versions of part 8134! The version installed in my Pirates 3/9116 (KIT) has a ball head installed at the lower end, the version supplied has upper and lower bushings (8037) that hold the steering cups in the c-cup. Unfortunately, the 8037 bushings are not available as spare parts. In the instruction manual both the version with bushing (Page 12) and the version with the ball head (Page 23) are shown. So if you have the version with the ball head and have ordered the steering cups with bushing, you have a problem.
ZD Racing 8134 C-Mounts For For 9116 1/8 Vehicle Model RC Car Parts
US$7.99 US$9.99
0
Recommendations
Comments (1)
FML 20/03/2021
The new version is a bit stronger.
ZD Racing 8015 Horizontal Drive shaft For 9116 1/8 RC Car
US$10.29 US$17.99
0
Recommendations
Comments (0)
FML 20/03/2021
ATTENTION the M4x10 grub screw is not included and must be removed from the old part.
ZD Racing 8041 Front Lower Arm For 1/8 9116 RC Car Parts
US$5.87 US$10.99
0
Recommendations
Comments (0)
FML 27/02/2021
The loader works fine. Direct 220V connection built in. It's easy to use. The charger cannot discharge LiPo batteries. I can recommend the loader.
ToolkitRC M4Q 4x50W 5A AC 100W 4 Port DC Smart Charger XT60/XT30 Optional for 1-4S Lipo Battery
US$94.59 US$100.99
0
Recommendations
Comments (0)
FML 27/02/2021
The camera works reliably. The autofocus works fine. Viewing angle is very wide. The picture has very warm colors. Clamping function and tripod thread allow many mounting options. Very good for the price.
Upgraded Xiaovv 3MP USB Webcam IP Camera 150° Ultra Wide Angle Image Optimization Beauty Processing Auto Foucus for Live Broadcast Online Teaching Meeting Conference Web Camera
US$20.67 US$27.00
0
Recommendations
Comments (0)
FML 27/02/2021
You should always have these spare parts on hand.
ZD 9116 RC Car Racing 8054 Pins For Lower Suspension Arms Vehicle Model Parts
US$7.69 US$13.99
0
Recommendations
Comments (0)
FML 27/02/2021
Temperature sensor reacts quickly to temperature changes. All good.
Accessories 65W Constant Current Load NTC Temperature Probe DC5525 Crocodile Clip PD3.0 QC2.0/QC3.0 Trigger Adapters For UD18 USB Tester
US$5.76 US$11.99
0
Recommendations
Comments (0)
FML 27/02/2021
You should always have these spare parts on hand.
ZD Racing 8041 Front Lower Arm For 1/8 9116 RC Car Parts
US$5.87 US$10.99
0
Recommendations
Comments (0)
FML 27/02/2021
Comprehensive set of the smallest screws on the ZD Racing 9116 (MT-8)
42PCS 8084 Metal Screw Set for ZD Racing 9116 08427 1/8 Rc Car Spare Parts
US$5.81 US$11.99
0
Recommendations
Comments (0)
FML 27/02/2021
Warms very well. Level 1 of 3 can already be clearly felt. The vest is cut very tight. I wear an L (176cm, 70 kg) under a business shirt. I can recommend the vest.
Electric USB Power Supply Warm Heated Vest Intelligent Heating Jacket Racing Coat Best For Winter
US$56.62 US$67.99
0
Recommendations
Comments (0)
FML 27/02/2021
Simple quality at an affordable price. Not a precision instrument, but perfectly adequate for simple measurements.
6-inch 150mm Electronic Digital Caliper Ruler Carbon Fiber Composite Vernier
US$9.69 US$11.99
0
Recommendations
Comments (0)
ZD Racing 9116 1/8 4WD Brushless Electric Truck Metal Frame 100km/h RC Car Without Electric Parts
US$234.99 US$278.99

Q: what's largest size motor that can be fitted?

Asked by Amin1987 on 2020-12-29 04:20:25

FML A 4292 Brushless Motor. In use a 4274 and there is free space at the Car.

2021-01-01 04:14:11 Helpful (0)
Submit
Answers (2)
FML 22/07/2020
Sehr schnelle Lieferung in 7 Werktagen. Lieferung mit DHL. Lieferstatus perfekt abgebildet. Artikel wie beschrieben. Alles bestens.
XIAOMI Mijia 24 in 1 Multi-purpose Precision Screwdriver Set Aluminium S2 Steel Repair Tools
US$34.09 US$42.99
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe