All Messages

Libra Devi assicurarti di aver caricato la batteria dello Spitfire e che le batterie del controller siano a posto. Quindi prima metti la batteria nell'aereo, accendi il controller, sposta lo stick di controllo sinistro in alto e poi di nuovo in basso. Questo "legherà" l'aereo con il controller. Dopo questo l'aereo dovrebbe funzionare, se non contatta il servizio clienti Bangood..

2022-10-27 02:13:07 Helpful (0)
Submit
Answers (3)

Q: what does the osd display?

Asked by BG189355518 on 2022-10-12 09:13:35

Libra The OSD displays in your Goggles.....

2022-10-12 09:23:38 Helpful (1)
Submit
Answers (1)

Libra If as you say all the inputs are working except the motor. I'm sure you have moved the throttle stick up and down to arm the plane?.. If you are using another controller instead of the one that comes with the plane, are you sure you have armed the motor?

2022-09-15 11:27:45 Helpful (0)
Submit
Answers (2)

Q: will this be OK for taranus qz7?

Asked by BG346111664 on 2022-08-20 07:45:16

Libra This Ant. is for 2.4Ghz therefore it will work with your Radio. It gives a slightly stronger signal at 5db. but check that the tail connection to your TX is correct..

2022-08-22 05:55:16 Helpful (0)
Submit
Answers (1)

Libra It's very possible that the vibration is from the Prop being out of balance but a 12x6 prop is also too big and this could be why the motor is over heating. I am only using 11x6 on the larger Volentex plane the Assent. Try a smaller prop and make sure you balance it.. Good luck

2022-08-11 02:49:33 Helpful (0)
Submit
Answers (2)