BG223516120
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

BG223516120 15/12/2020
Nice piece. Bronze handle is solid brass and so heavy. A little bit sharp knurling, but it's OK. That little lock plate to precisely set angles at the end of the tool has quite sharp edges, probably not finished at all. Also teeth on the curved scale piece are sharp to touch. One completely loose screw, that tiny one to level the fence was completely free and roaming around the package, and thank god it was not lost during shipment. Same as with with fence I bought with this (https://www.banggood.com/Drillpro-30x60x450mm-Aluminum-Box-Joint-Jig-Kit-For-Miter-Gauge-Woodworking-Tool-p-1400439.html) On the tip of the rail guide there is a plate at bottom to prevent it from lifting up off the t-track, but there is no such plate at the back. Yes, there is a handle so I should be able to keep an eye on this. Will see how it will work. It just arrived so I haven't tested it yet (no T-Tracks yet in table). Generally nice tool.
Wnew Upgraded Miter Gauge Brass Handle Table/Saw Router Miter Gauge Sawing Assembly Ruler
US$48.99 US$99.99
2
Recommendations
Comments (0)
BlitzWolf BW-YPC110 Wireless Endoscope 8mm 2.0MP 1200P HD WiFi Borescope Snake Inspection Camera 8 Adjustable LED Lights For iOS & Android Smart Phones Tablets
US$27.16 US$35.99

Q: Waterproof cap .. does it mean that camera is NOT waterproof without it? And so if the cap is on, then not other tool like hook/magnet can be on as well?

Asked by BG223516120 on 2020-12-29 08:13:17

kostya1133 в воду нельзя

2021-11-13 10:53:29 Helpful (1)
Submit
Answers (3)
BlitzWolf BW-YPC110 Wireless Endoscope 8mm 2.0MP 1200P HD WiFi Borescope Snake Inspection Camera 8 Adjustable LED Lights For iOS & Android Smart Phones Tablets
US$27.16 US$35.99

Q: How rigid is (will be) the cable ?

Asked by BG223516120 on 2020-12-29 08:14:13

Osmac X Hi, I haven't used it for length yet . It's a cable, not a rod . I assume he can handle short distances without support . And it is according to individual needs

2021-03-25 07:13:09 Helpful (1)
Submit
Answers (3)
BG223516120 30/11/2020
Red elox aluminum looks good and I hope it will not fall and so stays true. Fits easily other rulers or straight edges, however not all. Slot is some 38mm wide, so my 40mm rulers do not fit :-( I used calipers + other metal rulers to check the scale of provided 30 cm (back side in inches) and it seems to be correct. Casted body seems reasonably square (inner) and in 45/90/225 angle. Enough for center finding or raw angle measurements for general woodworking/timber-framing, I would think twice for using it for precise cabinet making of other fine woodworking. Seems not suitable for precise metalworking but to be fair it is not meant to be that kind of tool/precision grade. Magnet is strong enough to keep ruler in, but allows it to be easily removed or position adjusted without risk of body/ruler falling off even without knurled knob holding ruler being tight.
YX-3 Woodworking Magnetic Center Scriber Finder 45 90 Degrees Angle Line Caliber Ruler Metric and Inch Wood Measuring Scribe Tool
US$29.69 US$32.99
1
Recommendations
Comments (0)
BG223516120 30/11/2020
Just arrived and looks good. Writes good. Will see how long it will last, as one of my permanent markers is with me for more then 5 years, while others did not last more than a year and dried out. Point seems sharp enough, but actual footprint, drawn line, seems like 0.7+ in thickness (bit wider on softer materials so it soaks a bit). I'd appreciate thinner line, like 0.5 or even 0.3. But that is still fantastic pen because of long tip to write through templates, as broken pencils/micropencils are simply point-less ;-)
20mm Multifunction Woodworking Long Nib Marker Pen Hardware Wood Depth Marker Pens
US$8.79 US$9.99
1
Recommendations
Comments (0)
Drillpro Stainless Steel 360 Degree Mini Digital Protractor Inclinometer Electronic Level Box Magnetic Base Measuring Tools
US$25.99 US$45.99

Q: Is it waterproof (what's IP rating) ?

Asked by BG223516120 on 2020-11-30 01:13:16

BG852143701 Ithink isn't waterproof.

2021-02-26 04:57:14 Helpful (1)
Submit
Answers (1)
BG223516120 15/12/2020
Thanks to aluminum profile and oval holes in miter it fits to miter gauge quite well. I was a bit worried about this and especially miter gauge and tip of it's rail guide rod as package was a bit squashed at the corner, but it seems OK. Few screws were way too loose and one completely free flying inside package. So assembly could be better and more careful.
Wnew 30x60x450mm Aluminum Miter Gauge Box Joint Jig Kit Router Table Saw DIY Tools For Woodworking Tool
US$41.99 US$69.99
3
Recommendations
Comments (0)
BG223516120 15/12/2020
Base is hair under 11cm, so it's more like ruler then square. Knurled nuts are a bit loose so it offers ability to make it true, but it's not true from factory, pay attention to it. Mine came with a bit sharp bend close to the end, see photos, not sure where it happened. Otherwise it is fine cut ruler, with tiny increments. Ballpoint 0.5 do not fit, but I use micro-pencils or knives anyway (knife might not be right option here).
Drillpro 200/300/400mm Stainless Steel Precision Marking T Ruler Hole Positioning Measuring Ruler Woodworking Scriber Scribing Tool
US$19.79 US$23.99
2
Recommendations
Comments (0)
BG223516120 11/11/2020
Looks well built and adequate to the price. Anodized aluminum slides well. Bronze curl knobs fit to fingers. Nothing too sharp to touch. Smooth precise surfaces and color coded sliders. Bonus, it came in little metal box with foam inlay. I'll just cut there two incline points for better grip when polling tool out. But it's good that I can cut/make them whenever it fits to me. Good tracking of the package. Enough info sent from shop about delivery statuses when they changed. Swift delivery from some local in-country storage (delivered in just 2 days). Tracking overshoot (came earlier then expected) delivery date (which was set with time precision to seconds :-) ), but it's far better then delayed delivery, for sure. Good service so far.
Drillpro Table Saw Slot Adjuster Mortise and Tenon Tool Woodworking Movable Measuring Block Tool
US$28.65 US$35.48
1
Recommendations
Comments (0)
Drillpro 12pcs 8mm Shank Tungsten Carbide Router Bit Set With Wooden Case Woodworking Cutter
US$26.13 US$35.99

Q: What is the difference between Drillpro router bits in red, yellow, blue, green and black color ? Those seems to me pretty similar, so I'm a bit confused.

Asked by BG223516120 on 2020-12-26 03:03:37

Katydid It's just the outer coating color is different, the material is no different.

2021-01-06 06:34:06 Helpful (0)
Submit
Answers (1)
Stainless Steel Concealed Hinge 7-Shape Chicken Mouth Shape Door Hinge 360 Degree Rotating Hardware
US$3.29 US$7.99

Q: What are all dimensions of both L and S size?

Asked by BG223516120 on 2020-12-29 08:37:52
Submit
Answers (0)
BG223516120 28/12/2020
Nice AL extrusions, expected quality. However I would recommend to seller to improve packing or to buyer to purchase those in a bigger quantities, so those will support each other in transit. As smaller t-tracks I purchased before had bubble-wrapped ends. But those bigger ones came just in tiny miralon + heavily wrapped to just plastic bag + tiny caps. Yes, thankfully, they had extra plastic thin end-caps, which probably saved them, as those end-caps came shattered partially and saved corners a bit. One another thing I'd like to is to purchase those in longer variant, as 1m seems to be a maximum, but with 1200mm there will be more useful offcuts from those. Otherwise it seems they came without any visual bending. Going to workshop to check and mount them into table.
Drillpro 100-1200mm T-slot T-track Miter Track Jig Fixture Slot 30x12.8mm For Table Saw Router Table Woodworking Tool
US$11.99 US$12.99
0
Recommendations
Comments (0)
BG223516120 21/12/2020
Looks solid and pretty adjustable (same as miter jig). Predrilled holes are threaded. Sliding disks on both ends to prevent mi jigs and sleds from popping out of track. Just arrived, and so not mounted into anything yet. but can't wait to do so.
300mm 450mm T-track Miter Slot Slider Bar Alloy Woodworking Table Saw Gauge Tool
US$11.82 US$16.99
0
Recommendations
Comments (0)
BG223516120 15/12/2020
Nice finish and square according to DIN square.
VEIKO 2 Set Woodworking Precision Clamping Square L-Shaped Auxiliary Fixture Splicing Board Carpenter Square Ruler Woodworking Tool
US$43.99 US$49.99
0
Recommendations
Comments (0)
BG223516120 15/12/2020
Looks good and ordered in qty:3 in hope that they'll not come bended if bundled in pack. And it came OK.
ENJOYWOOD 300-1220mm T-track T-slot Miter Track Jig T Screw Fixture Slot 19x9.5mm For Table Saw Router Table Woodworking Tool
US$14.99 US$19.99
0
Recommendations
Comments (0)
BG223516120 10/12/2020
Finally and silently landed in my mailbox, today. Packed just in plastic bags and tiny bit of bubble sack. A bit rough grind on the facets of the reamer, but generally looks good. Not tested yet.
Drillpro 3-13mm Bridge Pin Hole Hand Held Taper Reamer T Handle Tapered 6 Fluted Chamfer Bit Woodworking Tool
US$8.01 US$13.99
0
Recommendations
Comments (0)
Geekcreit® 2500W 48V 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal Coil With Power Supply Full Kit
US$252.99 US$328.99

Q: Hi why the power supply even without load gives me the red light and has no power? Who can help me

Asked by BG215591013 on 2020-12-01 05:02:52

BG223516120 I think I seen (nor big&red enough) warning in the text above to NOT turn power supply without any load, and some comments that it will not work OK and break itself.

2020-12-03 08:13:30 Helpful (0)
Submit
Answers (1)
PP2000 Lexia 3 Diagnostic OBD Interface Scan Tool For Peugeot for Citroen
US$77.30 US$88.99

Q: What are "most present" models ?So what is firmware version and does this support/handle cars made around 2018-2019 like Peugeot Expert or Citroen Spacetourer ?Anly working on 32bit and Win7 seems to me a bit old and rusty, not trusty.

Asked by BG223516120 on 2020-11-30 12:47:30
Submit
Answers (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe