Pros: 1. You can use M4p as a standalone meter (without any psu in the field) to check the battery status! 2. Pretty powerful charger considering it's size and with a built-in fan but also depended on the psu you hook it on. 3. If you need to drop the battery voltage from let's say 4.2v (full charge) to a lower state (3.85v storage charge) you can recycle the extra voltage back to an other battery that you will plug to the input port. 4. You can use M4p as a powerbank if you have the xt60 to usb-c cable (not included) to charge any usb-c device. Cons: 1. I'm fine charging my 2s batteries on 1 or 2 amps but my qc4+ combo just makes the charger go into a bootloop. So I HAD to use a qc3.0 cable to get it working in 12v instead of 20v that I would normally get in order to charge my batteries at 5A if needed. 2. Don't bother looking for a firmware upgrade since ToolkitRC doesn't support any firmware upgrades for the M4 Pocket. 3. The cables of a small mAh battery probably won't reach between the main and the balancing port. It happened in my FC650s 1600mAh stock battery. 4. You need a converter if you wish to charge t plug batteries like I did.

Pros: 1. You can use M4p as a standalone meter (without any psu in the field) to check the battery status! 2. Pretty powerful charger considering it's size and with a built-in fan but also depended on the psu you hook it on. 3. If you need to drop the battery voltage from let's say 4.2v (full charge) to a lower state (3.85v storage charge) you can recycle the extra voltage back to an other battery that you will plug to the input port. 4. You can use M4p as a powerbank if you have the xt60 to usb-c cable (not included) to charge any usb-c device. Cons: 1. I'm fine charging my 2s batteries on 1 or 2 amps but my qc4+ combo just makes the charger go into a bootloop. So I HAD to use a qc3.0 cable to get it working in 12v instead of 20v that I would normally get in order to charge my batteries at 5A if needed. 2. Don't bother looking for a firmware upgrade since ToolkitRC doesn't support any firmware upgrades for the M4 Pocket. 3. The cables of a small mAh battery probably won't reach between the main and the balancing port. It happened in my FC650s 1600mAh stock battery. 4. You need a converter if you wish to charge t plug batteries like I did.

Pros: 1. You can use M4p as a standalone meter (without any psu in the field) to check the battery status! 2. Pretty powerful charger considering it's size and with a built-in fan but also depended on the psu you hook it on. 3. If you need to drop the battery voltage from let's say 4.2v (full charge) to a lower state (3.85v storage charge) you can recycle the extra voltage back to an other battery that you will plug to the input port. 4. You can use M4p as a powerbank if you have the xt60 to usb-c cable (not included) to charge any usb-c device. Cons: 1. I'm fine charging my 2s batteries on 1 or 2 amps but my qc4+ combo just makes the charger go into a bootloop. So I HAD to use a qc3.0 cable to get it working in 12v instead of 20v that I would normally get in order to charge my batteries at 5A if needed. 2. Don't bother looking for a firmware upgrade since ToolkitRC doesn't support any firmware upgrades for the M4 Pocket. 3. The cables of a small mAh battery probably won't reach between the main and the balancing port. It happened in my FC650s 1600mAh stock battery. 4. You need a converter if you wish to charge t plug batteries like I did.

works perfect so useful and perfect for charging when traveling small and powerful 😁

works perfect so useful and perfect for charging when traveling small and powerful 😁

works perfect so useful and perfect for charging when traveling small and powerful 😁

Good for emergency lipo charger..

Good for emergency lipo charger..

Good for emergency lipo charger..

small powerfull

small powerfull

small powerfull

Super-shelfy loader. Leaves here opp mitt 2s lipo 3500 mah with 5A via a 65w usbc charger! Can also be bruised to leave the phone with the Lipo. And then the lit. A must have for everyone.

Super hendig lader. lader her opp mitt 2s lipo 3500 mah med 5A via en 65w usbc lader! Kan også brukes til å lade mobilen med Lipoen. og så liten. et must have for alle.

Super-shelfy loader. Leaves here opp mitt 2s lipo 3500 mah with 5A via a 65w usbc charger! Can also be bruised to leave the phone with the Lipo. And then the lit. A must have for everyone.

really well done.

davvero ben fatto.

really well done.

fast delivery, good quality

fast delivery, good quality

fast delivery, good quality

super!

super!

super!

Perfect für laden unterwegs mit usb-c an der Po. Innerhalb 10 Tagen geliefert.

Perfect für laden unterwegs mit usb-c an der Po. Innerhalb 10 Tagen geliefert.

Perfect für laden unterwegs mit usb-c an der Po. Innerhalb 10 Tagen geliefert.

works well 💪💪

works well 💪💪

works well 💪💪