Customer Reviews

4.79 out of 5
See all 33 reviews
Write a Review
  • All Reviews (33)
  • Image (4)
  • Video (0)
  • All Star
    • All Star(33)
    • 5 Star(27)
    • 4 Star(5)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
Show Original

A part of the review has been auto-translated.

  • 22/02/2021

    command well received entirely with the two propellers because banggood had forgotten the other time, works well but you have to change the connector because it is 1S and it cuts the engine, you have to put a JST connector see on the photo, for engine power in 2S.

    Show Original
  • 13/01/2021

    Thank you for the quick delivery By the way, why didn't you send me the propella in the picture above?Is the propeller not on the original order list? Then shouldn't there be no propeller in the order picture? Please give us a clear answer so that the order is not confusing.

    Comments (1)
    Show Original
  • 07/02/2021

    order received quickly is good, but it is missing the two propellers as it is mentioned on the description, Banggood to forgotten, I will claim.

    Show Original
  • 07/10/2020

    my delivery did not contain the propellers that should have been part of the combo. the rest looks good and worked in a first test.

    Comments (4)
    Show Original
  • 08/01/2021

    Quick delivery! Successfully bench tested with Tx X8510 Grp and FrSky Europe DJT module in D8 mode It is advisable to monitor the state of the connections of the very fragile wires on the engine . On my copy I had the yellow to cut and more than a single strand on the red . For the programming of the motor track, in my case, start with the max speed and then towards minimun . It is seen from my side , It would be wise to use smaller diameter propellers than those provided. Use servo microphones; the output voltage on the male port connectors is 3.75 V!! Otherwise good material.

    Comments (1)
    Show Original
  • 23/08/2021

    Received in good condition within delivery date . Busy testing . 1st problem Motor wires a bit short to put Rx in a suitable place in model.2nd Problem motor rough in CCW and jams in CW direction .Motor in 2nd package turns smoothly , will test under power . 1st RX and Motor working OK . 2nd RX and Motor working OK. Maybe an obstruction inside motor was cleared ,running OK now . Thanks BG

    Show Original
  • 21/05/2021

    Just received the package for Futaba S-FHSS, in a good condition (I guess). There is no manual nor any explanation. There is no specifaction to mention what kind of servo that can be used (1.7g class only or can be used for for bigger ones). Just hope it can bind automatically with the transmitter and works well with 3.7 Servo)

    Show Original
  • 22/09/2021

    The connectors are quite weak but the board works well overall. I had a hard time figuring out how to mount the prop as it's not bolted on or anything.

    Show Original
  • 01/09/2021

    A lot of power and good range, they came to me with helices. The only bad thing is that you have to be very careful with the motor cables, they are very delicate and also it's a little short cable, but nothing that a little tin can't fix.

    Show Original
  • 17/08/2021

    Arrived today well before expected due date! all looks in great condition cant wait to install this incredibly small receiver and motor. Thumbs up from me:)

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • AU$42.61
    • AU$12.61
    • AU$23.66
    • AU$34.72
    • AU$22.09
    • AU$41.03
    • AU$75.76
    • AU$39.45
    • AU$23.66
    • AU$24.05
    • AU$23.66
    • AU$36.29
    • AU$11.47
    • AU$7.02
    • AU$23.66
    • AU$102.60
    • AU$22.95
    • AU$17.21