Customer Reviews

4.94 out of 5
Write a Review
  • All Reviews (1682)
  • Image (249)
  • Video (1)
  • All Star
    • All Star(1682)
    • 5 Star(1603)
    • 4 Star(65)
    • 3 Star(12)
    • 2 Star(2)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
Show Original

A part of the review has been auto-translated.

  • 26/12/2020

    Bought this to cut aluminium on my 3018 pro. I have a couple of issues to start with: the motor wires need to be lengthened for this to adequately move on the machine. simple enough to do with a couple of barrel connectors, but just be aware. The second is the fan on the top of the motor. its verticle fins only really disrupt the air and do not keep the motor cool enough. i have designed and printed a propper cooling fan which keeps the motor temp down, as it can get quite hot. the final thing to moan about is the power box. there is no safety switch, once plugged in the system is live so make sure the speed control is at zero or the motor is no where near anything. its easy enough to add one, and you can even use a relay to switch it on and off from the original board. so onto the good bits. the motor is easy enough to setup, the aluminium block i recommend you use, as it acts as a heat sink for the motor. you will have to print a new carriage for it though. for the 3018 pro machine, the motor doesnt put too much strain on the x axis, but for greater depths and speed, i recommend adding an additional rail to reduce flex. the motor is actually quieter than the original motor, and will allow you to mill aluminium, and it may do steel at a really low feedrate. i am still experimenting with speeds and feeds, but all in all a really good kit to upgrade the basic 3018 bench mills!

    Comments (4)
    Show Original
  • 07/09/2020

    Packaging received in very short time here in brazil, very well packaged and protected, order well traced by banggood and the mail. Works really well, I would recommend this product, solid foundation ideal for use on cnc machines and with measurements to mount up to a 20x80 aluminum profile. Any questions can ask in Portuguese, English or Spanish. Package received in a very short time here in brazil, very well packaged and protected, order well tracked by banggood and by the post. It works very well, i would recommend this product, solid foundation ideal for use in cnc machines and with measures to mount up to an aluminum profile 20x80. Any doubt can ask, in Portuguese, English or spanish. Paquete recibido en muy corto tiempo aca en brasil, muy bien packed and protected, commienda bien tracked by banggood y por los coros. Works muy bien, would recommend this product, solid foundation ideal to use in machines cnc and con measurements to mount hasta in a 20x80 aluminium profile. Cualquier duda pueden ask, in portugues, English the spanol.

    Comments (3)
    Show Original
  • 14/07/2020

    Absolutely love this! I made a video where I use one to turn a 3D printer into a CNC and it kinda works well! I've cut wood, plastic, aluminium, linoeum so far. The only fault I would say is the Chinese writing on the PSU so you need to take care when wiring it up.

    Comments (1)
    Show Original
  • 03/08/2020

    Received as described. Tested, and it's working. Not assembled yet. I made a model of the bracket with measurements as precise as I could. Screws are M6.

    Show Original
  • 28/11/2020

    Order received quickly, sent neatly in a well protected cardboard. Compliant material and that looks good... It remains to be seen in time. I recommend

    Show Original
  • 17/10/2020

    Delivery fast. Packed securely and neatly. Just like the description. The goods are quality. Pleased with the purchase. Fast delivery. Is packed reliably. All as in the description. Fine quality. I'm satisfied.

    Show Original
  • 07/09/2020

    Seems Great. packing was perfect and it was delivered very fast. Rpm settings work perfectly. I don't know about the power, I have to try it on the machine

    Show Original
  • 13/07/2020

    I got my CNC 500W spindle today. I am very pleased, that the delivery was fast and the spindle was nicely packaged :) Positives: - The spindle is smaller than I expect (compare to my dremel - see 2nd picture). It is a nice thing, because I can easily mount it on my diy cnc machine. - And especially it is almost 3 times more powerful than my dremel, so it is really very powerful! Negatives: - It is very loud at the full power (But compare to my dremel: if I set it on approximately same power, it is much much more quieter than my dremel). - The cooling isn´t the best, but you can easily print the new fan on 3D printer. But I must say that even the original cooling is sufficient. - It hasn´t variable chuck. It has only 1pcs 1/8 (for 3.175mm bit) collet. So if you want put there another size bits, don´t forget buy collets for it! Summary: It is very powerfull spindle and I strongly recommed it.

    Comments (2)
    Show Original
  • 21/09/2020

    Product came very well packaged and protected, in shipping were not careful, excellent already I am using, very quiet...

    Comments (1)
    Show Original
  • 23/07/2020

    Fast Shipping. compliments. the piece inside came out folded, perhaps they overlapped a weight above. It can be remedied. Very silent motor and no vibration.

    Comments (1)
    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • AU$17.53
    • AU$11.87
    • AU$21.26
    • AU$226.76
    • AU$16.81
    • AU$8.17
    • AU$40.48
    • AU$18.88
    • AU$10.53
    • AU$162.87
    • AU$4.71
    • AU$8.17
    • AU$6.28
    • AU$8.44
    • AU$12.14
    • AU$4.71
    • AU$8.09
    • AU$148.47