A little less bulky than I expected, but it’s not an issue. _Nice (red) anodized aluminum frxame. Good quality product at a reasonable price. 👍🏼👍🏼

A little less bulky than I expected, but it’s not an issue. Nice (red) anodized aluminum frame. Good quality product at a reasonable price. 👍🏼👍🏼

A little less bulky than I expected, but it’s not an issue. _Nice (red) anodized aluminum frxame. Good quality product at a reasonable price. 👍🏼👍🏼

This self-clamping device for a dog hole is a fantastic piece of work! The processing is of a high level! But it should be noted that the owner must have a very precise wood drill!!! Otherwise,when drilling a hole that will have a gap of 0.2 to 0.3 thousandths of a millimeter,the fixture will not work!!!! It will pull out with the holes! The bore must be absolutely free of play! For the manufacturer has it milled to a tenth of a millimeter!!!! Which is an unbelievable precision for woodworking!!!!!! I myself drilled a hole with a Forstner drill which was not precise and the fixture pulled out of the hole. Later I used an old Czechoslovakian drill which is precise and everything works! I recommend it,but you must have a precise drill! The manufacturer should mention this! Greatly packaged,fast delivery. Thank you.

Tak tahle svěrka do psí díry je parádní práce! Zpracování je na vysoké úrovni! Ale je třeba podotknout,že majitel musí mít velmi přesný vrták do dřeva!!!!!Jinak když se vyvrtá díra,která bude mít mezeru 02 až 0,3 dessetiny milimetru přípravek nebude fungovat!!!! Bude se vytahovat s díry! Otvor musí být absolutně bez vůle! Nebot výrobce to má obrobené na setinu milimetru!!!! Což je pro dřevoobrábění nevídaná přesnost!!!!!! Sám sem vrtal díru Forstnerovým vrtákem,který nebyl přesný a přípravek se mi vytahoval z díry.Posleze jsem použil starý Českolovenský vrták který je přesný a vše funguje! Doporučuji ale musíte mít přesný vrták! Výrobce by tohle měl zmínit! Parádní zabaleno,rychlá dodávka.Děkuji.

This self-clamping device for a dog hole is a fantastic piece of work! The processing is of a high level! But it should be noted that the owner must have a very precise wood drill!!! Otherwise,when drilling a hole that will have a gap of 0.2 to 0.3 thousandths of a millimeter,the fixture will not work!!!! It will pull out with the holes! The bore must be absolutely free of play! For the manufacturer has it milled to a tenth of a millimeter!!!! Which is an unbelievable precision for woodworking!!!!!! I myself drilled a hole with a Forstner drill which was not precise and the fixture pulled out of the hole. Later I used an old Czechoslovakian drill which is precise and everything works! I recommend it,but you must have a precise drill! The manufacturer should mention this! Greatly packaged,fast delivery. Thank you.