This model flies amazingly well. Its one of those weird, hidden BG gems. It does not fly mental fast, but it is extremely well behaved. Flies for about 12 minutes on a tiny 2S battery pack. Will fly slow, quite fast, is happy inverted and even rolls like a peach. 1806 2300Kv motor with a 5x5 prop is what is ideal for this one. Love mine, fly it loads at home too. Matt

This model flies amazingly well. Its one of those weird, hidden BG gems. It does not fly mental fast, but it is extremely well behaved. Flies for about 12 minutes on a tiny 2S battery pack. Will fly slow, quite fast, is happy inverted and even rolls like a peach. 1806 2300Kv motor with a 5x5 prop is what is ideal for this one. Love mine, fly it loads at home too. Matt

This model flies amazingly well. Its one of those weird, hidden BG gems. It does not fly mental fast, but it is extremely well behaved. Flies for about 12 minutes on a tiny 2S battery pack. Will fly slow, quite fast, is happy inverted and even rolls like a peach. 1806 2300Kv motor with a 5x5 prop is what is ideal for this one. Love mine, fly it loads at home too. Matt

This airplane is light, rugged, and flies well if built properly aligned. Mine has a DYS 1806 2300 with a 5045 prop, a 3s 500, 4x6g servos, and a small 6 channel rx, with a mass of 240g. It will climb vertically, do inside and outside loops and consecutive rolls, and will still fly slowly and easily at part throttle if you want. The landing gear mount and motor mount are strong. It taxis well, given the limitation of not having a tail wheel. The kit hardware is of good quality. My kit came with a misaligned fuselage--all the taper to the tail, seen from above, was on one side. It is important to fix this if you have this problem. Use straight edges on each side of the fuselage to see how much misalignment is present. Peel back the red sides from the rear to get to where the misalignment begins, and remove a very small wedge of material from the fuselage to allow it to bend so that the tail is centered. Glue it back together with the tail centered. The fuselage aft of the wing is also not stiff enough. Reinforce the fuselage with 0.5 mm carbon rod inset in knife slits you make in the side of the fuselage, running from below the back of the servo openings to the tail, and in the existing slit in the bottom of the fuselage. When you glue the wings to the fuselage, measure to check that the distance from the tail of the fuselage to each wingtip is the same. The cg should be on the spar. I had to add weight to the tail to get it to balance.

This airplane is light, rugged, and flies well if built properly aligned. Mine has a DYS 1806 2300 with a 5045 prop, a 3s 500, 4x6g servos, and a small 6 channel rx, with a mass of 240g. It will climb vertically, do inside and outside loops and consecutive rolls, and will still fly slowly and easily at part throttle if you want. The landing gear mount and motor mount are strong. It taxis well, given the limitation of not having a tail wheel. The kit hardware is of good quality. My kit came with a misaligned fuselage--all the taper to the tail, seen from above, was on one side. It is important to fix this if you have this problem. Use straight edges on each side of the fuselage to see how much misalignment is present. Peel back the red sides from the rear to get to where the misalignment begins, and remove a very small wedge of material from the fuselage to allow it to bend so that the tail is centered. Glue it back together with the tail centered. The fuselage aft of the wing is also not stiff enough. Reinforce the fuselage with 0.5 mm carbon rod inset in knife slits you make in the side of the fuselage, running from below the back of the servo openings to the tail, and in the existing slit in the bottom of the fuselage. When you glue the wings to the fuselage, measure to check that the distance from the tail of the fuselage to each wingtip is the same. The cg should be on the spar. I had to add weight to the tail to get it to balance.

This airplane is light, rugged, and flies well if built properly aligned. Mine has a DYS 1806 2300 with a 5045 prop, a 3s 500, 4x6g servos, and a small 6 channel rx, with a mass of 240g. It will climb vertically, do inside and outside loops and consecutive rolls, and will still fly slowly and easily at part throttle if you want. The landing gear mount and motor mount are strong. It taxis well, given the limitation of not having a tail wheel. The kit hardware is of good quality. My kit came with a misaligned fuselage--all the taper to the tail, seen from above, was on one side. It is important to fix this if you have this problem. Use straight edges on each side of the fuselage to see how much misalignment is present. Peel back the red sides from the rear to get to where the misalignment begins, and remove a very small wedge of material from the fuselage to allow it to bend so that the tail is centered. Glue it back together with the tail centered. The fuselage aft of the wing is also not stiff enough. Reinforce the fuselage with 0.5 mm carbon rod inset in knife slits you make in the side of the fuselage, running from below the back of the servo openings to the tail, and in the existing slit in the bottom of the fuselage. When you glue the wings to the fuselage, measure to check that the distance from the tail of the fuselage to each wingtip is the same. The cg should be on the spar. I had to add weight to the tail to get it to balance.

Hello good product, fly great in small spaces such as degreibe the seller, good quality and easy assembly, mount an engine 1806 (2400 kv) and tripala of 5x4x3 the tail train wheel is my thing does not come in the Kit. Thank you very much for a greeting

Hola buen producto, vuela genial en espacios pequeños tal como desgribe el vendedor, de buena calidad y fácil montaje, monte un motor 1806 (2400 kv) y tripala de 5x4x3 la rueda del tren de cola es cosa mía no viene en el Kit. Muchas gracias por todo un saludo

Hello good product, fly great in small spaces such as degreibe the seller, good quality and easy assembly, mount an engine 1806 (2400 kv) and tripala of 5x4x3 the tail train wheel is my thing does not come in the Kit. Thank you very much for a greeting

arrived quickly. a bit damage to the box but everything inside look OK. cannot wait to put it together. check my unboxing video. https://youtu.be/lCfeu_Ec57E

arrived quickly. a bit damage to the box but everything inside look OK. cannot wait to put it together. check my unboxing video. https://youtu.be/lCfeu_Ec57E

arrived quickly. a bit damage to the box but everything inside look OK. cannot wait to put it together. check my unboxing video. https://youtu.be/lCfeu_Ec57E

i havent flight yet ,but looks fine,it needs a carbon rod in tail because it moves when you apply elevator.

i havent flight yet ,but looks fine,it needs a carbon rod in tail because it moves when you apply elevator.

i havent flight yet ,but looks fine,it needs a carbon rod in tail because it moves when you apply elevator.

Very nice flyer. Very flexible material. Good price and good quality. Thank you!

Sehr schöner Flieger. Sehr flexibeles Material. Guter Preis und gute Qualität. Danke!

Very nice flyer. Very flexible material. Good price and good quality. Thank you!

easy to assemble, great value for money!!!

facile da assemblare, ottimo rapporto qualità prezzo !!!

easy to assemble, great value for money!!!

Simple and primitve, but from what I heard it's a nice flyer. Arrived undamaged, only the fuselage was slightly croocked, but it should be easy to fix with hot water. The manual is in Chinesee only and the photos are useless, but it's a simple enough kit to build. Should be a nice plane to fly and with that price tag you shouldn't be too concerned about stuffing it in a tree.

Simple and primitve, but from what I heard it's a nice flyer. Arrived undamaged, only the fuselage was slightly croocked, but it should be easy to fix with hot water. The manual is in Chinesee only and the photos are useless, but it's a simple enough kit to build. Should be a nice plane to fly and with that price tag you shouldn't be too concerned about stuffing it in a tree.

Simple and primitve, but from what I heard it's a nice flyer. Arrived undamaged, only the fuselage was slightly croocked, but it should be easy to fix with hot water. The manual is in Chinesee only and the photos are useless, but it's a simple enough kit to build. Should be a nice plane to fly and with that price tag you shouldn't be too concerned about stuffing it in a tree.

I haven't flown it yet , looks great , it needs reinforcing in tail because it moves when you apply elevator.

I haven't flown it yet , looks great , it needs reinforcing in tail because it moves when you apply elevator.

I haven't flown it yet , looks great , it needs reinforcing in tail because it moves when you apply elevator.

This was fun plane to put together! Does not come with a spar to help keep the rear end of the fuselage straight when using rudder or elevator but I made my own and all is well! Quality of product is

This was fun plane to put together! Does not come with a spar to help keep the rear end of the fuselage straight when using rudder or elevator but I made my own and all is well! Quality of product is

This was fun plane to put together! Does not come with a spar to help keep the rear end of the fuselage straight when using rudder or elevator but I made my own and all is well! Quality of product is