Dancing Wings Hobby R03 Mini Stick 580mm Wingspan Balsa Wood RC Airplane KIT/PNP
A part of the review has been auto-translated.
Very nice. Not so easy to build, but very satisfying! Remember that it does not include film cover.
the kit looks very complete, I like it very much first impression, missing the most interesting that is build I hope it fits well I recommend them!
It came to me on time and in perfect condition. It comes with rods to move aileron, etc. from servo and with hooks to wings and ailerons.
Great, be careful, the balza is thin. When you're done with step 01-7, skip step 01-8, continue until you set the tail, then go back to step 01-8, or I almost broke the tail.
Unfortunately the box arrived in very bad condition and took a long time to deliver, fortunately it seems that content has no apparent damage.
really well done! my first model in balsa kit, too bad there is no design, but only some indications on how to proceed....
Very good product, according to the description
I'm fine
Arrived in a slightly crushed box, but once opened you can see that no damage was done owing to the sturdy packaging. I hope to use this as a out of the boot flyer, so when the mood takes me i can just stop somewhere and fly it. I have all the other parts needed, so just need to put it together.
I was pleased to find this Kit in a well put together Cardboard box. A glossy picture label on the kit box, identifies the contents. Inside the Box is a sealed polythene bag containing all the kit parts. All Balsa parts are die cut in the supplied Balsa sheets. At 580mm Wingspan, this will make a nice light park Flyer powered from a small (500mA/Hr) Lipo. This looksw like a good looking simple construction, 4Ch Model Aircraft with plenty of room for radio installation. I will use standard Radio, with 3X submin 4g (5V) Servos I have A 2212 1000KV Brushless motor running off a 15A ESC, that I have should give more than adequate Power I might fit a smaller Motor that I own. The kit includes control horn hardware, even screw adjustable types, which I prefer. I cant see any wire Pushrods, but they are easy to make from aprox 0,8mm piano wire No covering film supplied, but Solarfilm will fit the bill. This looks like good value, easy build Park Flyer without having to go to 1S Micro Radio gear. Ill try to build this sometime over the Break.