DIY Portable Battery Storage Spot Welding Board Welding Equipment Spot Welders for 12V-14.6V Battery
A part of the review has been auto-translated.
It's all right. I did this for the first time. Type KIT, with 0.1 mm working volume, I would like to use in 4th century. It didn't come up, so I didn't want to. Car services: Wanted half a year, but not yet another person - it was good for spot welding as a power source. And the years-year-old lifelessness was reborn. I have not found any of the other ways on earth. It must be done as soon as possible and it will do so. It's totally fine. It's the first time I've done this. Volume KIT, with 0.1mm strip, I used it mainly at grade 4. It didn't get warm, though, I was working slowly. Car battery: scrapped six months ago, but not yet completely dead - as a power supply for spot welding was good. And the 20-year-old battery drill was reborn. I have not experienced any problems mentioned by some Internet sites. You have to use it by the book and then you do your job.
I got my product. I videotaped it for the test. But my product doesn't make a point. I brought it up to a level 5. It doesn't make much difference. I'm using it. Just so you know, that's all I have to say. I want an answer from you. Have a good day.
spot on delivery everything was soldered on on all ready to use just need to bow the wires on nothing to do good delivery
good
Ia working well, but he need some improvement on cooling because the temperature rises very fast on electronic parts.This is what i've done to it.
As described. Works well, as I expected for my hobby stuff. Price is reasonable. On the picture, car battery clamps are mine, it does not come with it but it is OK, you can connect to different type of battery.
yet to test .. for the rest there is everything you need ..
Works very well . You will need a high pulse current source, either a large capacity battery ( 100 AH or similar) or alternatively a car "jump starter" with high current from a lithium battery ( I use a 300 amp one) . As is usual, no instructions come with the item, anyone familiar with basic electronics can work it out, but there is also plenty of info generally available ( Youtube etc) for these devices. The "key" connection is for a pushbutton that steps through the pulse current levels with an LED indicator for each step ( red is the highest)
Ok. Good quality.
ΠΟΛΥ ΚΑΛΟ ΙΚΑΝΟΠΟΙΗΜΕΝΟΣ.