A part of the review has been auto-translated.
Excellent size for small models uses 1.0 combos for 1.7 or 2.2 g servos, comes with different connectors this rx does not need esc comes integrated just put servos, connector. battery and a motor and that's it
Perfect for conversion of Guillow's rubber balsa airplanes to RC. The receiver comes with 2 pieces of JST SH connectors (1.0mm and 1.25mm) that can be soldered to pcb for motor connection. I personally use Dupont connectors for motors. 2S LiPo via classic red JST and AWG20 wire. Many companies re-brand this receiver (same product number MA-RX62HE printed on pcb). On the left side the Crossover-RX, on the right the AEORC (bought at BG). Example motors AEORC MM1104 3700KV, Racerstar 1811 2000KV.
Tiny little 4 channel receiver with brushless esc built in !! Looks well made. I've used the brushed motor version in a previous model which is still working very well.
ok
ok
Works very well for an indoor DIY plane. Everything on a single board.
Receiver show! fast delivery!
Perfect, just what I needed for my scratch built UMX foamie
Very nice and compact, works very well; very small and very light; good qualitiy;