Customer Reviews

4.88 out of 5
See all 181 reviews
Write a Review
  • All Reviews (181)
  • Image (29)
  • Video (0)
  • All Star
    • All Star(181)
    • 5 Star(165)
    • 4 Star(11)
    • 3 Star(4)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 13/11/2020

    Good, heavy source, meets specifications. However, it is worth pointing out that it is not exactly the same as the photo presented in the ad (Changes more aesthetic and the DC outlet does not have 4 pins equal to the photo, has only two). At the most all right. Delivery in two weeks

    Comments (2)
    Show Original
  • 29/05/2021

    Not a bad power supply. I am using it on my TPA3116D2 Bluetooth 5.0 HiFi Digital Amplifier. It's running the relay speaker protection board through a buck converter at 12v and another buck at 5v for phone charging while running that amp at 24v without getting warm. Not really recommended on an amplifier, it does have a bit of a dirty signal but overall not bad. I got two of them.

    Comments
    Show Original
  • 26/01/2021

    Verz verz fast shiping, almost unbelievably fast at this time in the time of the corona, good quality, good seller

    Comments
    Show Original
  • 08/01/2021

    very good quality very fast shiping

    Comments
    Show Original
  • 09/05/2021

    its oky but much better if they have box same the other item in the photo.

    Comments
    Show Original
  • 12/01/2018

    Please thoroughly inspect all the components before connecting this cheap and cheery power supply to mains. If required re-solder the janky components so they make a better contact. Check the transistors for shorts. And if you can spare a few bucks more change out all the capacitors with better quality ones because the stock caps have rather high ESRs. And clean the bottom of the board with acetone or alcohol so that the flux doesn't corrode component leads months down the road.

    Comments
    Show Original
  • 01/02/2019

    Recibí el producto en el tiempo descrito, ya lo tengo funcionando, hasta ahora todo va bien, la calidad es buena y cumple con las especificaciones, lo recomiendo

    Comments (2)
    Show Original
  • 14/01/2019

    Assembling quality higher than middle (somewhere sees solder flux), but for this price is Ok (I saw much expensive boards with less quality). I done small measurements (see in pictures). Unfortunately they was done without load (at this moment I have not any 24 v equipment).

    Comments
    Show Original
  • 13/10/2019

    Plate with signs of repair, so it is not a new plate, but used, I hope in the next purchase does not happen again, or some problem of the kind, this is the reason why I do not give five stars, but the plate works.

    Comments
    Show Original
  • gdjVIP2
    ZA
    04/11/2019

    This power supply can easily be 'adjusted by changing the two resistors on the TL431 reference IC. I added a 10K to the bottom resistor and get 29V. I used three in series to produce 88V for the RIDEN DPS 8005, works great.., just added three reverse diodes on the output to prevent back emf during supply power off/on Quality product, clean and well build. This is my second buy, the first was the 36V version from the same company. Highly recommended, It even has EMI filter and common mode filters.

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • AU$12.54
    • AU$18.40
    • AU$11.15
    • AU$29.14
    • AU$6.96
    • AU$6.26
    • AU$26.07
    • AU$6.96
    • AU$35.28
    • AU$10.73
    • AU$4.59
    • AU$5.57
    • AU$4.17
    • AU$18.12
    • AU$8.64
    • AU$5.82
    • AU$11.15
    • AU$26.78