All Messages

Q: Can a Guudgo door sencor be connected to it?

Asked by vange on 2022-03-31 03:00:35

Atarian This totally depends on the smart home platform you are using. For example using Tuya the BW-IS11 can be connected to door sensors that are also available on the Tuya platform.

2022-04-01 05:45:07 Helpful (0)
Submit
Answers (3)

Atarian As far as I know the SHP15 is reporting power consumption more frequently than the SHP13, I believe the SHP13 is sending power consumption every minute where the SHP15 can do it like every few seconds.

2021-08-15 06:46:54 Helpful (6)
Submit
Answers (3)

Atarian What I did is use a powered hub between camera and computer with individual on-off buttons for each port of the USB hub, so you can easily cut power to whatever USB device you do not want to have active, enabled, connected all the time.

2021-07-25 08:44:37 Helpful (1)
Submit
Answers (5)

Q: Does this support RTSP?

Asked by Thor187 on 2020-12-07 01:24:04

Atarian No, unfortunately not.

2020-12-07 03:44:42 Helpful (0)
Submit
Answers (1)

Atarian In the APP you can easily switch off or on the controller and therefore the LED strip. I do not understand why you think you need to cycle to all the presets.

2020-11-17 05:57:21 Helpful (0)
Submit
Answers (1)

Q: What gateron switches are they?

Asked by Bashir190102 on 2020-11-09 05:37:58

Atarian It is mentioned in the title: Gateron blue switches "Blue - Clicky - 55g - High Noise Level For those who love the click and clack of a keyboard. Generates a loud click and tactile bump when a key is pressed. Popular for typing and programmers. Note: clacking will annoy your peers."

2020-11-11 04:19:00 Helpful (0)
Submit
Answers (1)

Atarian The product you are referring to is normally used to connect two led-strips together, not divide them. So to me it seems you need something different. You need a solution that is 2 meters long and carries data (and power) over to the next LED strip. The connector terminators you refer to can be used on both sides. Beware that the longer the total length of the strip the more power & amps is needed to drive the LEDs.

2020-11-09 02:20:50 Helpful (0)
Submit
Answers (2)

Atarian Not necessarily the BlitzWolf gateway, but a certain Zigbee gateway. I myself have linked this to a Conbee II Zigbee router as gateway.

2020-10-05 03:42:17 Helpful (0)
Submit
Answers (6)