All Messages

maurits If you mean the DS3231SN chip, it is freely available from electronic vendors.

2021-07-19 10:14:59 Helpful (2)
Submit
Answers (2)

Q: Can i connect 2 subwoofers in one slot from the crossover??

Asked by BG524861413 on 2021-06-21 10:10:16

maurits As long as their combined impedance is not lower than 4 ohms, you should be able to connect any number of subwoofers. The formula for calculating combined impedance or resistance is easily found on the web.

2021-06-21 10:37:32 Helpful (0)
Submit
Answers (1)

maurits Thanksfor that warning about the thickness of the caps. I'm also fixing a spacer for safety's sake. For those who want to do the same, the size of the IC is 15x15mm. Another thing to look out for: The nuts and washers for the control pots ship loose within the same bag as the amp. Make sure some of them are not lodged between components causing a short.

joshmio 09/09/2019
3
Comments (1)

Q: What is the value of the potentiometers at front?

Asked by antdraws13 on 2019-08-31 10:26:38

maurits The numeric value of the pots are B50K. (B means linear taper)

2021-04-24 12:20:12 Helpful (0)
Submit
Answers (2)

Q: What are the value of the potentiometers??

Asked by aqeel1235566 on 2020-01-14 08:28:49

maurits The numeric value of the pots are B50K. (B means linear taper)

2021-04-24 12:18:52 Helpful (0)
Submit
Answers (2)

maurits According to the Chinese pamphlet accompanying the kit, instructions are to be found the manufacturer's website. The link is on the pamphlet. However the site is only in Chinese. I wish Banggood, who is also Chinese, would go the trouble of getting those instructions and translate it into English.

2021-04-24 11:38:46 Helpful (0)
Submit
Answers (1)

Q: Do you have an enclosure for this amplifier?

Asked by BG953331533 on 2020-08-29 05:19:18

maurits Transparent acrylic enclosures are available on Ebay and Aliexpress for around $50.

2021-02-23 04:36:53 Helpful (0)
Submit
Answers (3)

Q: Is this Mini suitable to mount 30W (or 40W) NEJE laser module?

Asked by spletko on 2021-02-22 05:16:10

maurits It seems doubtful to me. The laser head is fitted directly to the arm of the machine with 2 screws, and not into a slot as on machines with interchangeable lasers. Also the motherboard seems purposely built to fit only this machine, so if other electronics for another laser is needed, one would probably not be able to interchange it.

2021-02-22 02:41:02 Helpful (0)
Submit
Answers (4)

Q: Can it display MPH ?

Asked by tij909 on 2021-02-16 02:22:34

maurits Yes, it looks like it. MPH is shown on one of the product pictures.

2021-02-16 12:41:31 Helpful (0)
Submit
Answers (1)

maurits You use the car's OBD socket, which should be somewhere below the steering wheel.

2021-02-16 12:39:52 Helpful (1)
Submit
Answers (1)

Q: va bene per diesel bmw e90 330d 2009

Asked by totò26 on 2021-01-13 03:44:01

maurits Dovrebbe funzionare su quel veicolo.

2021-02-16 12:28:49 Helpful (0)
Submit
Answers (1)