bang_but_good
Q: This porn gun, yes? Other useings I understandn't!
Asked by bang_but_good on 2021-01-19 12:43:00
Q: What is the name of the grey input/output connectors visible in the product pictures?
Asked by bang_but_good on 2021-08-15 01:45:03
Terry666 Anderson connector
2022-02-01 08:01:52 Helpful (1)Q: How many A DC it can take ?
Asked by amerkhafagi on 2022-02-20 05:20:56
bang_but_good It is in the name, plugs with the name starting with XT90 can safely take a continuous load of 90 amps, and for example plugs starting with XT60 can safely take a continuous load of 60 amps, and XT30 can safely take a continuous load of 30 amps, etc...
2022-02-20 02:47:16 Helpful (2)Q: How many lumens of light do each single one of these lamps produce?
Asked by bang_but_good on 2021-01-21 04:38:49
Verries That depends entirely on the bulbs you put in them, these are just the projector part
2021-12-04 12:51:04 Helpful (0)
pendersricardo Ifyou leave it running long enough you will burn yourself even with only 1A, the first time that you turn it on you'll smell that it's cooking pretty fast, DO NOT TOUCH IT after having it running longer than 5 minutes maybe even less. Don't listen to what the others said, my answer is an honest one speaking from experience with this thing myself.
2021-06-30 01:13:25 Helpful (1)Q: How can this BMS have balance function if there are no balance wires going to each cell group?
Asked by bang_but_good on 2019-07-29 08:22:52
davidgilson I don't know for sure as I don't make this, but I believe it does have balance connections. B-=0V, B1=4.2V, B2=8.4V, B+=12.6V.
2021-07-24 06:44:22 Helpful (0)Q: Also include female hole, yes?
Asked by bang_but_good on 2021-01-19 12:50:27
Angel Si, es macho y hembra
2021-01-19 05:48:06 Helpful (0)Q: Can you give this ESP*****v on VCC or will that blow up the chip?
Asked by bang_but_good on 2019-06-15 08:51:19
Damo_the_Sane Do not use 5V directly on the ESP-01, it will blow it up. It needs 3.3V.
2020-11-22 09:09:20 Helpful (1)Q: Will these be useful with an SKR Mini E3 V1.2 board also installed?
Asked by scrorses on 2020-04-04 04:45:14
bang_but_good No, TL-Smoothers are not useful with a SKR Mini E3 V1.2 board already equipped with TMC2209 (or equivalent) Trinamic stepper drivers. EXPLANATION: The SKR Mini E3 V1.2 uses on-board TMC2209 (or equivalent) Trinamic stepper drivers, TL-Smoothers provide electrical dampening (albeit somewhat crude) of the recirculating motor coil current to prevent various vibration artifacts such as ringing, shadowing, ghosting and rippling. Your board has onboard Trinamic stepper drivers. Trinamic stepper drivers actively measure and adjust motor coil current to achieve optimal electrical dampening, this automatically makes the stepper motors run quieter and mitigates the aforementioned vibration artifacts. For additional (and a more technical) explanation see this website (replace all underscores with a normal slash): blog.trinamic.com_2018_08_16_tl-smoothers-do-they-make-sense By the way, you could have easily found all this if you had spent a little time Googling the answer :)
2020-04-04 05:14:18 Helpful (3)
Q: Can this Led Bulb be controlled by Bakeey 433MHz Wall Panel Wireless Remote Transmitter ID: 1526908?
Asked by fyb82 on 2020-02-16 06:52:20
bang_but_good No, this lamp can only be controlled via WiFi (with the BlitzWolf app on your phone or the TuyaSmart app, with Alexa or with Google Home) or this lamp van be controlled via the included infrared remote control.
2020-02-16 09:08:00 Helpful (1)
bang_but_good CCT, or Configurable Color Temperature, means the LEDs inside the bulb are capable of emitting white light anywhere from Cold White to Neutral White and up to Warm White. So basically the color temperature of the LED bulb supports a Configurable Color Temperature, CCT, as it is capable of producing the entirety of the commonly available spectrum of white light. (from ~2500K to ~6500K)
2020-02-05 02:40:42 Helpful (0)
Q: The pitcure shows a box that has 5 storage cases, is this what you get for ***** ?
Asked by trdarcy on 2019-01-10 10:03:58
bang_but_good No, you get one box which can store 4x 18650 batteries.
2019-10-03 08:01:24 Helpful (0)Q: Are these actually printed with labels for each day of the week?
Asked by bang_but_good on 2019-07-11 06:35:22
wujiahui The printed logo is as shown in the picture.
2019-07-14 09:07:00 Helpful (0)
bang_but_good OnRFXcom you need firmware Ext1 to enable reception of the protocol used by these devices. Then you need to use RFXmngr to enable the "Rubicson, Alecto,Banggood" protocol (and ONLY that protocol, unless you need specific other protocols, if you do then you can enable those too). Then click "Set Mode" and "Save Settings" to commit the settings to the RFXcom device memory. You can download the Ext1 firmware and the RFXmngr software from the RFXcom website downloads section. If you need extra information just read the RFXcom manual (also in downloads section). All the information you need is in there, that is where I got it from :)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
.jpg)
.JPG)
BG542070325Joy I don't even understand that 🤣🤣
2022-06-18 09:47:32 Helpful (0)