Customer Reviews

4.79 out of 5
See all 150 reviews
Write a Review
  • All Reviews (150)
  • Image (26)
  • Video (2)
  • All Star
    • All Star(150)
    • 5 Star(135)
    • 4 Star(8)
    • 3 Star(2)
    • 2 Star(1)
    • 1 Star(4)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
Show Original

A part of the review has been auto-translated.


    I am satisfied with the beautiful aircraft. The silhouette of the head of the horizontally-opposed engine showing the face out of the nacelle reproduces the real silhouette, and the structure of the spring attached to the landing gear that absorbs shock is very realistic. The tail wheel that works with the ladder has the same structure as the real one. really wonderful. The transmitter is marked with "S-FHSS", but it is not compatible with FUTABA. As a result of various experiments, the "KN" protocol was in agreement. If you are not satisfied with the included transmitter, please use DeviationFW or OpenTX's multi-protocol transmitter. 5ch is assigned to DR and 8ch to 3G-6G. I'm glad if you can use it as a reference.

    Comments (3)
    Show Original
  • 19/01/2021

    Plane received, though well past the "2-5 day" and "1-week delivery" claims. Closer to 3 weeks. All looks good and in pristine condition. In contrast the replacement parts I ordered as spares (wing, fuselage, stabilizer, spinner) all arrived packs together tightly in one soft bag wrapped with a single sheet of corrugated cardboard wrapped around and taped close, and as such the fuselage and both wings had dents and crush zones in several places. Seeking replacements for the replacements! See pics below of said parts.

    Comments (2)
    Show Original
  • 15/08/2020

    Very nice semi-model. Easy to ride. The spinner fell at the first "bad fall" but I prefer without. The flight is beautiful and fluid. Prefer to fly it in small winds at most. Beware of low speeds or stalling will not forgive. The 3D or 6G mode is good. In conclusion a beautiful acquisition that I do not regret. A very good rivalry between eachine P51 and T28 that I also have. Thank you XK for this nice product that I recommend and thank you banggood.

    Comments (2)
    Show Original
  • 15/08/2020

    Excellent little plane, really well detailed and a great flyer, I have done two You Tube videos so far and you can find them here:- and here:- I found the flight time to be in excess of ten minutes on the stock 74.v 500Mah battery, You may wish to double check the centre of gravity if considering flying in 3D mode as it can be quite twitchy and prone to spiral drive, initally aim for a cog on 25% of the wing chord then move back up to a 1/3rd (33%) from the leading edge to suit your own flying in 3D mode. There are two rate in 6G mode. use a bit of power when turning and do not apply too much evelator, other than that its a perfect little plane and thanks to Banggood for a super fast delivery and service.

    Show Original
  • 18/10/2020

    Love this plane! Took about a month and a half to arrive and was worth the wait. Great bang for your buck. I experienced some instability in the maiden flight and nose dived from about 6 feet. The plane is very durable and held up extremely well. No damage at all! The second flight was perfection. Make sure to put the rudder control linkage on the outermost hole on the control horn. I do not recommend this plane for inexperienced pilots! For all others, highly recommend!

    Show Original
  • 06/09/2021

    XK A160 J-3 cub Arrived today👍 well packed and in tip top condition, very easy, 20mins to assemble. horizontal stabiliser was a bit scary to install, seems a bit tail heavy to me, maiden flight soon!

    Comments (2)
    Show Original
  • 29/03/2022

    Everything perfect, a little punch in the box but everything is fine. As for the plane, just what I expected. The instructions are brief but give you a hint of the protocols it uses and that can be used, indicating that you can change the receiver to another one you want from the controller compatible.

    Comments (1)
    Show Original
  • 14/05/2022

    beautiful scale model look beautiful to look at

    Show Original
  • 11/11/2021

    When I did the maiden flight of this one together with a mini P-51 and two mini wing dragons, this one was only slightly behind the P-51 for fun, but this Cub is larger and more scale looking, and had the best presence while flying (and sitting on the ground). It's really a great looking model. Personally I did the following mods before flight. 1. lengthen the exit slots at the tail, for the elevator and rudder pushrods. The bend in the pushrod was actually pushing against the back of the slot. 2. Moved the rudder pushrod to the INNER hole at the SERVO, and the OUTER hole at the rudder, to reduce rudder throw. Thanks to some YT reviewers who highlighted the potential for rudder over-control. 3. Flex the elevator up and down by hand while disconnected - it was too stiff and the pushrod was just bending. My CG is about 1/3 of the wing chord back from the leading edge, I couldn't get what they were saying in the instructions about the CG. It flew great - stable and predictable in beginner mode. Did not appear tail-heavy but had a slight tendency to gain height, which I might correct by moving the CG a touch forward or adding a half turn of manual down trim. I enjoyed flying this plane, it looks very scale while flying, and the landing looked just like the real thing. Delivery was very quick to Italy from CZ (or ES, can't remember but they are both fast). Recommended if you're not a total beginner and you can check your elevator and rudder pushrod setup.

    Comments (1)
    Show Original
  • 22/05/2021

    Fast shipping and Nice scale design. maiden on my YouTube RC Sertzen

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$98.99
    • US$130.89
    • US$92.99
    • US$104.99
    • US$20.99
    • US$99.99
    • US$79.99
    • US$244.98
    • US$93.49
    • US$153.99