Customer Reviews

4.86 out of 5
See all 22 reviews
Write a Review
  • All Reviews (22)
  • Image (4)
  • Video (1)
  • All Star
    • All Star(22)
    • 5 Star(19)
    • 4 Star(3)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
Show Original

A part of the review has been auto-translated.

  • 04/11/2021

    Thank you,. item received with many thanks. Will assemble during weekend. Just noticed that the iv-18 tube got black spot in the back, hope it is ok n not defect product. Installation manual i've downloaded from the designer website of Mr.YanZeyuan.

    Show Original
  • 19/01/2021

    Product as description. Assembled and tested ok working as expected. The IV18 tube in the kit has only 19 pins. Pins 1,13 the filament (13ohm) and 1 is connected to ground. Rest is easy. Reccomend.

    Comments (1)
    Show Original
  • 26/03/2020

    Excellent price for this set. We arrived in Belarus in 10 days, then customs clearance. Packed everything in a cardboard box, all in bags and wrapped in navel. I think I'll enjoy the evening.

    Show Original
  • 25/02/2020

    WARNING!! The clock is shipped with a newer tube and the pin configuration is different than what is described on the manual.

    Comments (2)
    Show Original
  • 27/11/2021

    Well packaged in box and internal plastic air cushions with the most sensitive part (the tube) in the middle of the box. Quick overview and all bits seem to be present. Will take full inventory when I get to assemble it, hopefully over the holidays.

    Show Original
  • 10/12/2021

    this cool, it has temperature sensor, ambient light sensor, 2 alarms, and a countdown

    Show Original
  • 25/11/2020

    In total it is a nice designed product with some minor issues. Positive: - An overall vintage good-looking design. - Auto-adjustment of the indicator's luminosity according to the ambient light is very helpful. - A clock of a decent accuracy, even without an attached optional GPS antenna. Negative: - Following the assembly guide results into the misaligned USB and GPS sockets and the openings in the case. The seller could add additional 4x white plastic washers that are required to align the PCB with the openings. - Temperature sensor is useless. Immediately after starting the clock the sensor is showing a proper temperature, but with the time it is heating up and drifting up. It looks like the author have already seen this issue and has tried to separate the sensor from the rest by a long gap in the PCB, but it seems to be not enough. - Indication of date and time is very similar and it is rather hard to see the difference. It would be reasonable to add an additional format of dates that would have just only a day and a month, but represented in a significantly different form from time, e.g. "10 OCT" or "10 TUE". - It would be nice to have a kind of a screen-saver that would show something funny any use other segments that are not normally used for indication of time like in the other versions of a such clock on IV-18.

    Comments (1)
    Show Original
  • 12/05/2020

    this was now the second clock i ordered and ifound the same problem with the fluorescent tube. all pins of this tube have the same lenght with no indication of pin one and two and so on.

    Show Original
  • 13/01/2019

    I made a video review of this clock. I also assembled it on this video:

    Comments (3)
    Show Original
  • 24/10/2020

    a problem, send a tube with 19 PIN the Boas are made for 22 pin, not any diagram for adaptation.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$151.57
    • US$11.47
    • US$18.39
    • US$37.23
    • US$13.96
    • US$17.79
    • US$7.99
    • US$44.99
    • US$21.80
    • US$15.66
    • US$24.22
    • US$10.82
    • US$16.90
    • US$36.05
    • US$14.11
    • US$16.63
    • US$27.99
    • US$33.90