Customer Reviews

4.97 out of 5
See all 707 reviews
Write a Review
  • All Reviews (707)
  • Image (193)
  • Video (8)
  • All Star
    • All Star(707)
    • 5 Star(691)
    • 4 Star(13)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
Show Original

A part of the review has been auto-translated.

  • 15/05/2022

    It looks super dope and stood out from the rest to me. Thing can also take a beating, crashed into concrete from a dive and it still holds up. Be aware it is very small, can be tricky to work with.

    Show Original
  • sahca

    Frame fire, super, just perfection 😀. I'm buying it a second time and I'm very happy. It is very durable, it has a lot of serious dye and is still intact. For a rookie, it's just what you need. There's a lot of stuff you can stuff into this frame, space allows. In general, I suggest 👌

    Show Original
  • LeoVIP3

    O frame e muito barato pela qualidade dele os braços são separados pra trocar quando quebrar o espaço interno e ótimo mas se vc precisar de mais vem com dois espaçadores que aumentam esse espaço e muito leve para um racer de 218mm. vem com 2 protetores de motor a mais. recomendo para quem esta começando.

    Show Original
  • 15/03/2018

    "FROG LITE" rocking the Racerstar 2306BRS...2700kv motors Racerstar AIO Starf3s 30amp fc Racerstar 5042 v2 props Eachine ct800 tvl cam Eachine 526 VTX switchable 25/200 /600 mw 35v...1000uf CAP and a "BUCK" regulator set @ 8.45volts RX is flysky x6b (ibus). PRESTINE VIDEO powerful...not to forget the REALACC 3dbi RHCP Pagoda!! pretty smooth flyer and powerful. Hope I can flash Butterflight!!!

    Show Original
  • 05/03/2018

    It's a great design quad. All electronic components need to be squeezed into a small frame. One who buys this frame needs to consider the number of stackable boards. It's light and flying great. The M2 screws heads are easily wear off. Could have supply more screws in the package.

    Comments (1)
    Show Original
  • 23/10/2017

    This Frame can take a hit - A BIG HIT! The most durable frame i ever had! Nice to build, nice to fly, if you find another Frame as good as this for this price, you lie! Or it is made of cheap plastic... The parts fit perfectly together, the Alloy is nice and smooth, 7075 Alloy! I dont get it why other Frames with alloy parts have to be so expensive... For me: This the Frame of the Year(s)! You will have a lot of fun with it, and you cant go wrong when buying one! Recommend 10/10

    Show Original
  • 23/09/2017

    i got so many crashes, and still works fine, you can see on photos! I ordered again two frame, to tech childrens to fly. as tiek kartu crashinau, ir visvien jis laiko. Tiesa svoris nuogo reme yra 110gramu, o ne kaip jie ten raso. Viso surinkto kopterio svoris 340g be bateriojos. Sudetis: Runcam Swift2, Matek 405AIO, 4x Emax 2205, 4x emax bulet 30A, TBS unify HV race is laido padariau antena, Lantian 2 in 1 WS2812B LED And 5V Active Buzzer, FlySky FS-X6B receiver

    Show Original
  • 22/08/2017

    Very clean edges on the frame. Everything fit together perfectly with the included hardware. Also came with spacers to give a bit more room for the electronics; these were not shown on the product page, but I'm glad to have them. Without the spacers there's about 20 mm for the electronics stack, and with the spacers there's about 24 mm.

    Show Original
  • 17/03/2019

    TransTEC Frog Lite 218mm for 5 inch drone with 30mm mount hole. It is very easy to assemble FC, ESC, PDB, CAM, receiver and so on. It is GOOD frame for me.

    Comments (1)
    Show Original
  • 17/01/2020

    It's a compact frame Because the aluminum frame is small (low), the stack must be 20mm high However, since there is a carbon block to raise the aluminum frame in the accessory, there is a surplus of about 5 mm (^-^) If you put the PDB and put the ESC on the arm, it seems to fit without thinking about anything, but if you put it in 4in1, it was enough 4in1 F7 VTX&DVR RX CAP(X2) Bz Arm LED(X4) Tail LED Camera Configuration (^-^) The carbon plate is still uncut The aluminum frame is very good (^-^) I thought I'd put the battery on an upper mount, but it's not on top Strictly speaking, it's on the list... but 4S1800mAh is out 4S1500mAh is close to the camera, 4S1300mAh is somehow like a close-up It also has a battery protector so that it can be bottom mounted, so we can hang it down

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$16.01
    • US$84.99
    • US$19.52
    • US$92.39
    • US$9.01
    • US$18.99
    • US$3.65
    • US$25.29
    • US$27.54
    • US$12.09
    • US$9.59
    • US$24.99
    • US$71.99
    • US$5.49
    • US$3.99
    • US$21.99
    • US$4.17
    • US$20.67