The Plug and Play (PNP) version of the Fly Baby can be ready to fly within 15 minutes of opening the box thanks to its clever design. The wing simply bolts on as well as the undercarriage and tail assembly. The rigging wire are pre-made and simply require clipping in place. The decals are pre-applied but are quite thin and fragile to the touch so spraying some clear lacquer over the top would be a good idea. The wheels are very hard so if flying off asphalt you may want to swap them for softer foam wheels of the same size. We found that the CG was better about 30mm further forward than recommended in the factory instructions. We also recommend using 30% exponential on the ailerons and elevator for a smooth flying experience. Unfortunately this model does NOT come with a pilot so we took this from another model to give it that perfect scale appearance in the air. Otherwise that is one small negative point for a model that would be ideal as a second model for any enthusiastic RC pilot. Full flight test here, https://www.youtube.com/watch?v=YKgKmgASP5I

The Plug and Play (PNP) version of the Fly Baby can be ready to fly within 15 minutes of opening the box thanks to its clever design. The wing simply bolts on as well as the undercarriage and tail assembly. The rigging wire are pre-made and simply require clipping in place. The decals are pre-applied but are quite thin and fragile to the touch so spraying some clear lacquer over the top would be a good idea. The wheels are very hard so if flying off asphalt you may want to swap them for softer foam wheels of the same size. We found that the CG was better about 30mm further forward than recommended in the factory instructions. We also recommend using 30% exponential on the ailerons and elevator for a smooth flying experience. Unfortunately this model does NOT come with a pilot so we took this from another model to give it that perfect scale appearance in the air. Otherwise that is one small negative point for a model that would be ideal as a second model for any enthusiastic RC pilot. Full flight test here, https://www.youtube.com/watch?v=YKgKmgASP5I

The Plug and Play (PNP) version of the Fly Baby can be ready to fly within 15 minutes of opening the box thanks to its clever design. The wing simply bolts on as well as the undercarriage and tail assembly. The rigging wire are pre-made and simply require clipping in place. The decals are pre-applied but are quite thin and fragile to the touch so spraying some clear lacquer over the top would be a good idea. The wheels are very hard so if flying off asphalt you may want to swap them for softer foam wheels of the same size. We found that the CG was better about 30mm further forward than recommended in the factory instructions. We also recommend using 30% exponential on the ailerons and elevator for a smooth flying experience. Unfortunately this model does NOT come with a pilot so we took this from another model to give it that perfect scale appearance in the air. Otherwise that is one small negative point for a model that would be ideal as a second model for any enthusiastic RC pilot. Full flight test here, https://www.youtube.com/watch?v=YKgKmgASP5I

Excellent Aeroplane came in 4 weeks. just one control rod end missing but not a problem.

Excellent Aeroplane came in 4 weeks. just one control rod end missing but not a problem.

Excellent Aeroplane came in 4 weeks. just one control rod end missing but not a problem.

Kit arrived in good shape and reasonable time for shipping from within the US. Some short falls in what was advertised - No decals in the kit for the wings ("Fly Baby") or the Fuselage. The aileron control rods did not come with fittings for the servo end so I cannot use what was provided - no parts available to connect to the servo.

Kit arrived in good shape and reasonable time for shipping from within the US. Some short falls in what was advertised - No decals in the kit for the wings ("Fly Baby") or the Fuselage. The aileron control rods did not come with fittings for the servo end so I cannot use what was provided - no parts available to connect to the servo.

Kit arrived in good shape and reasonable time for shipping from within the US. Some short falls in what was advertised - No decals in the kit for the wings ("Fly Baby") or the Fuselage. The aileron control rods did not come with fittings for the servo end so I cannot use what was provided - no parts available to connect to the servo.