Ship to United Kingdom , USD
Top Positive Review for %s on Banggood, Shop best %s with lowest price on Banggood. Browse most helpful positive review for %s before you buy., rc toys, fun sports, fashion, popular electronics
Jayjay63737 16/01/2020
I tested the flight controller with a DSMX receiver but it don't work. I also try with a frsky receiver (ibus and ppm) and it don't work too. I used UART1 and UART2 ports but they both don't work. I made a video : https://youtu.be/qbzpWaPqbYY
5
Comments (5)
Submit
  • Matt051 I tried two different types of Flysky receivers on the board and still had no luck. Done exactly the same as you tried ibus and sbus. Did you have a go at soldering the signal to the R2 solder pad? I didn't have much luck coming from it but you might. l also tried bridging the two DSM solder pads, to see if that would work. Still no luck it was a waste of money.

    Reply 21/01/2020
  • Jayjay63737 give a try with the rx serial of uart2 activated instead of uart1. I watch Gal Kremer's video :https://www.youtube.com/watch?v=YIeMWRVbKCw

    Reply 09/02/2020
  • SlaughterMitch You need to bridge the DSM pads. Conect both solder pads on the left, next to G, 5v and S. It works for me. Flysky reciever (Fli 14)

    Reply 17/03/2020
  • Matt051 @SlaughterMitch I have tried everything, even flashing it with the Geprc firmware some people mentioned they managed to get it to work by doing so. The only way I got it to fly is when I threw it down the end of the garden, then straight into the bin. It eventually packed in, it wont even light up when power on with battery, worse product I have ever bought.

    Reply 08/04/2020
  • OPELFRIK I have DSMX RX with SBUS output normaly connected and Works for me. But you must choose in BF UART2 for Receiver and VTX is onUART1 TX1. I also find 3.3V soldering pad for Spektrum RX if someone is interesting.

    Reply 20/05/2020
Satisfaction Survey

Download APP to get an exclusive 10% off coupon