Customer Reviews

4.98 out of 5
See all 45 reviews
Write a Review
  • All Reviews (45)
  • Image (3)
  • Video (0)
  • All Star
    • All Star(45)
    • 5 Star(44)
    • 4 Star(1)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 09/11/2020

    great little motor, the description wasn’t accurate though. the motor shaft is 4mm not 3mm as per the diagram in the description.

    Comments
    Show Original
  • 30/12/2020

    Great engine works very well

    Comments
    Show Original
  • 07/10/2020

    tested and it works good.

    Comments
    Show Original
  • 24/08/2021

    I tested this motor (1120 KV) when it arrived. It seems very well made and runs smoothly. My bench test using a 3S battery and 30 mAp ESC resulted in 150 Watts/12 mAp using a 8x5 prop and 220 watts/18 mAp using a 9x7 prop. I tested 10 inch and 11 inch props and found that the motor and ESC became very hot, so I would not recommend using larger than a 9" prop. Seems suitable for a 28 oz or 42 oz models.

    Comments
    Show Original
  • 30/12/2020

    I set this motor (1120kV version) to work in a Multiplex Blizzard on a 10x6" prop and 3s 2200 lipo. Static current draw approx. 24A. This may seem like a low power setup for the blizzard, but the thing still climbs vertically if needed (although 60° ascend angle gives better height gain), and provides 30+ minutes of flight fun. The motor runs very smooth and quietly. Only donwside is the somewhat stiff cable output - no problem in the Blizzard, which has plenty of space for much larger motors, but may be a hinderance in smaller fuselages. Considerung to get anther one of these to revive my ancient Ikarus Trainer 25.

    Comments
    Show Original
  • 10/03/2021

    Using the 1120KV version, alread my second order on this motor. Mechanically great and sturdy, coil winding so-so quality. Cable outlet very stiff. The 4mm shaft is quite big (and heavy) for such a small motor, but this may be useful in case you use it in taildragger planes likely to have the occasional prop ground contact Would buy again - did so, in fact :)

    Comments
    Show Original
  • 03/11/2020

    Nice motor. It performs better than I expected - quiet, smooth and runs cool. It is fitted in my Phoenix 2000 electric glider and with a 10x7 folding prop it has a good climb rate and good duration on a 3S lipo. It is better than the SK3 motor than was fitted previously

    Comments
    Show Original
  • 07/05/2021

    The engine is very powerful. I put it in my glider with a total of 1300g. A test flight has not yet taken place, but it is quite windy...;-)

    Comments
    Show Original
  • 05/11/2020

    Product description showed 3mm shaft. It was delivered with 4mm shaft. So now I have the wrong spinner and need to order a new one.

    Comments
    Show Original
  • 10/07/2021

    all good, just what I was looking for, fore a special project they will work awesome, thanks Banggoog??

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • AU$25.99
    • AU$22.93
    • AU$7.63
    • AU$35.16
    • AU$27.79
    • AU$18.06
    • AU$278.05
    • AU$45.87
    • AU$15.28
    • AU$9.72
    • AU$9.79
    • AU$21.11
    • AU$9.08
    • AU$79.51
    • AU$40.18
    • AU$27.51
    • AU$20.84
    • AU$21.34