Customer Reviews

5 out of 5
See all 28 reviews
Write a Review
  • All Reviews (28)
  • Image (8)
  • Video (0)
  • All Star
    • All Star(28)
    • 5 Star(28)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 27/07/2021

    Very fast delivery from the Czech Republic to Poland. Hot air had an Australian plug and no adapter!!! I had to change the wire. It also needed callibration because its temperature was 50 degrees Celsius too high. Overall, hot air is quite efficient, well-made and I’m satisfied with it

    Comments
    Show Original
  • 26/06/2021

    I am very pleased with this hot air rework station! it produces hot air very quickly and able to output to 450 degrees Celsius in 13 seconds. The fan speed is also adjustable. Value for money!

    Comments
    Show Original
  • 09/08/2021

    Arrived today in Umeå Sweden. Placed the order 30/7 and now today its here. Came with wrong plug. Unit and package looks to be in good shape though. No adapter included so I can't use it. Was expecting EU-plug but there was not. Disappointed.

    Comments
    Show Original
  • 27/10/2021

    Thanks, very fast delivery from CZ. Station works fine :) No EU plug :(

    Comments
    Show Original
  • 23/12/2020

    Very good 😃 enjoyed the season.

    Comments
    Show Original
  • 15/12/2020

    Very useful. 🇨🇳🇨🇳🇨🇳🇨🇳🇨🇳👍👍👍👍

    Comments
    Show Original
  • 22/10/2018

    Ordered this hot air soldering gun for my DIY board SMD component soldering and RC hobby module repairs. Was not mistaken - it works. External compressor allow to blow much larger air volume against lesser hot air guns with fan in handle. This extra air allow to remove and and solder in larger components too very easy. Air blowing at slower speed prevent blowing away components around soldering spot and melt wires and capacitor insulation nearby. Tried to solder anything in and out: SMD resistors and capacitors - check. Inductances - check. Diodes and transistors - check. SMD LDOs like LM78D15... and large FETs - check. SOP, QFN, QFP and LQFP ICs - check. Didn't tried BGAs yet by seen that they are reachable with this gun too. But use good flux like RMA-218 for SMD component soldering. Compatibility: Soldering paste - check. Regular solder - check. ROHS - check. Heat tube shrinking - check (temp no more than 150 degrees. To RC hobbyists - this gun appeared very nice in XT60 connector soldering even for thick 12AVG wires and to solder 12AWG wires to board. Was easier than with soldering iron. Extras: Have 4 replaceable nozzles. When handle is put back into the holder, device automatically cool down and goes into standby and back to working mode when handle is not in holder. Compressor is not loud on speed under 5 (for me it mean always :) Seems very good budget product, especially for this price. Had a little surprise when received this soldering gun with Australian mains plug and adapter for EU mains socket. It works from our 220V/50Hz without problems. Because ground connection in adapter is missing (it have ground contacts for socket and plug, but they are internally disconnected), I will replace plug to EU plug later.

    Comments (1)
    Show Original
  • 04/09/2020

    Very happy. Much quieter than expected. Works well and the build quality is good.

    Comments
    Show Original
  • 08/08/2021

    works well, quite happy with purchase. Came with an EU (type E/F) plug + universal-> Aus adapter (im in aus) unfortunately the adapter was of the wrong type as it doesnt connect to the earth on the EU plug plug side.

    Comments (1)
    Show Original
  • 21/10/2021

    Hi, I'm really happy with this unit. I had previously got one of the cheap multipurpose soldering station + heat guns, that was absolute garbage. Its power claims were complete lies. This unit is great. I measured its power consumption and it was bang on. A very minor criticism is that you have to carefully place the nozzle in the holder for it to power down, but after a bit of practice, it was fine. This was really great value for the price I paid. I did want the better quick model but it was 3 times more expensive so I got this one instead. VERY happy that I did.... Just does what the label says.. Recommended

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • AU$220.69
    • AU$78.30
    • AU$199.33
    • AU$10.55
    • AU$79.72
    • AU$46.97
    • AU$93.96
    • AU$24.19
    • AU$5.95
    • AU$12.80
    • AU$65.49
    • AU$106.78
    • AU$222.12
    • AU$19.92
    • AU$8.13
    • AU$39.86
    • AU$11.38
    • AU$65.77