Preis-Leistung stimmt hier. Der FC bietet alles was man braucht. Auch genügend UARTs. Der esc hat the BLHeli 32 und funktioniert tadellos. Wenn man das Timing auf Auto stellt und die Frequenz auf 48 Kilohertz fliegt man super effizient. Flüge zwischen 10 und 15 Minuten sind möglich. wichtig ist, den FC vor Vibrationen zu schützen. Ich habe dazu Gummipuffer genutzt. Ich habe das Gefühl, dass der ESC mit dem Tekko32 baugleich ist. den Tekko32 hatte ich zuvor und war super zufrieden.

Preis-Leistung stimmt hier. Der FC bietet alles was man braucht. Auch genügend UARTs. Der esc hat the BLHeli 32 und funktioniert tadellos. Wenn man das Timing auf Auto stellt und die Frequenz auf 48 Kilohertz fliegt man super effizient. Flüge zwischen 10 und 15 Minuten sind möglich. wichtig ist, den FC vor Vibrationen zu schützen. Ich habe dazu Gummipuffer genutzt. Ich habe das Gefühl, dass der ESC mit dem Tekko32 baugleich ist. den Tekko32 hatte ich zuvor und war super zufrieden.

Preis-Leistung stimmt hier. Der FC bietet alles was man braucht. Auch genügend UARTs. Der esc hat the BLHeli 32 und funktioniert tadellos. Wenn man das Timing auf Auto stellt und die Frequenz auf 48 Kilohertz fliegt man super effizient. Flüge zwischen 10 und 15 Minuten sind möglich. wichtig ist, den FC vor Vibrationen zu schützen. Ich habe dazu Gummipuffer genutzt. Ich habe das Gefühl, dass der ESC mit dem Tekko32 baugleich ist. den Tekko32 hatte ich zuvor und war super zufrieden.

I haven't installed this yet. But so far, this board is very well constructed and the features all look as good as all the reviews say they are, both here on BG and on YouTube. Some things to take note of are: 1) The stack comes screwed together with the fronts of the FC and the ESC 90 degrees perpendicular to each other. The wiring harnesses provided are long enough only for this configuration. (Settings in Betaflight, or other apps must be adjusted accordingly.) But if you prefer to physically align the fronts of both boards in the same direction, you will need to replace the provided wires with longer ones. 2) The ESC wiring diagram shows the V2 version, which has a slightly different layout from the ESC board that comes with this set. (I.e. the V2.1) 3) If you wish to go ahead with the pre-installed plastic board spacers and rubber grommets, you will need to use M2 screws or similarly types of grommets on your drone frame. You might be able to use M3 screws if you remove the pre-installed rubber grommets and board spacers. So all in all, I think it's a good buy because you really get quality stuff (neat layout, well designed, supposedly very reliable, etc.) for the price you pay. I really look forward to flying with this stack! Thanks Banggood for selling this!

I haven't installed this yet. But so far, this board is very well constructed and the features all look as good as all the reviews say they are, both here on BG and on YouTube. Some things to take note of are: 1) The stack comes screwed together with the fronts of the FC and the ESC 90 degrees perpendicular to each other. The wiring harnesses provided are long enough only for this configuration. (Settings in Betaflight, or other apps must be adjusted accordingly.) But if you prefer to physically align the fronts of both boards in the same direction, you will need to replace the provided wires with longer ones. 2) The ESC wiring diagram shows the V2 version, which has a slightly different layout from the ESC board that comes with this set. (I.e. the V2.1) 3) If you wish to go ahead with the pre-installed plastic board spacers and rubber grommets, you will need to use M2 screws or similarly types of grommets on your drone frame. You might be able to use M3 screws if you remove the pre-installed rubber grommets and board spacers. So all in all, I think it's a good buy because you really get quality stuff (neat layout, well designed, supposedly very reliable, etc.) for the price you pay. I really look forward to flying with this stack! Thanks Banggood for selling this!

I haven't installed this yet. But so far, this board is very well constructed and the features all look as good as all the reviews say they are, both here on BG and on YouTube. Some things to take note of are: 1) The stack comes screwed together with the fronts of the FC and the ESC 90 degrees perpendicular to each other. The wiring harnesses provided are long enough only for this configuration. (Settings in Betaflight, or other apps must be adjusted accordingly.) But if you prefer to physically align the fronts of both boards in the same direction, you will need to replace the provided wires with longer ones. 2) The ESC wiring diagram shows the V2 version, which has a slightly different layout from the ESC board that comes with this set. (I.e. the V2.1) 3) If you wish to go ahead with the pre-installed plastic board spacers and rubber grommets, you will need to use M2 screws or similarly types of grommets on your drone frame. You might be able to use M3 screws if you remove the pre-installed rubber grommets and board spacers. So all in all, I think it's a good buy because you really get quality stuff (neat layout, well designed, supposedly very reliable, etc.) for the price you pay. I really look forward to flying with this stack! Thanks Banggood for selling this!