Customer Reviews

4.94 out of 5
See all 2848 reviews
Write a Review
  • All Reviews (2848)
  • Image (469)
  • Video (9)
  • All Star
    • All Star(2848)
    • 5 Star(2702)
    • 4 Star(134)
    • 3 Star(11)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 20/11/2016

    I bought the FlySky FS-i6 for all my 10 drones. It supported the old AFHDS protocol for using mini RX receiver (DasMikro Ultra Miniature) and with AFHDS 2A I'm using all my RX receiver FS-iA6B. It come with USB cable for flashing or training on PC. The transmitter ist for beginner and for advanced aviators. With iBUS protocol you can use all the 4 buttons and two variable buttons on your quadcopter. Low cost and very, very good.

    Comments (1)
    Show Original
  • 05/12/2016

    Fonctionne très bien, je l'utilise en I-bus sur une SP F3 racing de chez Bangood. A savoir : bien que vendues ensemble, il faut binder le récepteur avec la radio!

    Comments
    Show Original
  • 03/05/2019

    Great Transmitter! Great Price! It was a bit of a challenge, as a newbie, to get all 10 channels to be enabled with the FS-A8S receiver. No firmware update is needed! I used two 16 channel converter modules, S2PW's, (each only has 8 outputs configurable for channels 1-8 (no red light) or 9-16 (red light active). The converter modules are setup, factory stock, to be channels 1-8. To enable channels 9-16 you need to press the button and hold it in while powering on those modules, then release. This only needs to be done once and they save their settings. The FS-A8S needs to be connected to the i.BUS input of the S2PW module configured for channels 9-16 (red light) when using more than 8 channels. The module, with the red lights output needs to be connected to the input of the second S2PW module configured as Channels 1-8 (no red light). At first, I had the A8S connected to the channel 1-8 module (no red light) and it did not allow channels 9-10 to get through to the second module. I then connected the A8S to the channel 9-16 module (red light) and everything works as expected with the 10 Channels of this radio. I included a Photo with how I set this up, the yellow wire between the two S2PW modules is the i.BUS signal. Red and black wires are power and ground wires. The transmitter "RX Mode" settings need to be set to output PPM on i.BUS. You also need to turn on all the AUX Switches. Save all settings and go into the "Display" mode of the transmitter, press UP/DOWN buttons to view channels 8-10. There is also a much more detailed manual on the manufacture website product page, there is no need to update the firmware to enable 10 channels and it may actually downgrade your radio to older firmware.

    Comments
    Show Original
  • 19/02/2017

    1. cheap; 2. popular; 3. w/ i-bus included; 4.up-gradable (antenna/battery/firmware); 5. responsive; 6. even skins are available for this one!... It deserves to be choosen.

    Comments
    Show Original
  • 03/04/2021

    Acceptable quality, it does not seem toy, but for the price, well suitable for those who started in the RC, it took less than what was said the beginning, up to 15 days, I hope to be able to use it soon, but with sufficient practices! 😊

    Comments
    Show Original
  • 27/04/2018

    ürün açıklamasında yazdığı gibi geldi. bu mesajı Türk kullanıcılar için yazıyorum. Gönül rahatlığı ile alabilirsiniz.

    Comments (1)
    Show Original
  • 17/08/2020

    Received in time and form, the quality of the materials is good, I would not say excellent but for the price is more than enough, I still do not really taste it, I am waiting for another article to try, but it is appreciated more than good, thanks bangood

    Comments
    Show Original
  • 20/10/2020

    Perfect! parcel a little damaged but it is the postal services that its not careful if not works perfectly what is a pity it is missing a manual for the receiver fs x6b with but it will have to be found on the internet, As a result, could not try the receiver yet. I recommend this is a great set for this launched in the fpv and understand how to connect a real receiver that looks really more powerful than the fsa8s.

    Comments (2)
    Show Original
  • 28/02/2020

    Very good 2,4 GHz 6-10 ch transmitter for my planes. With altitude and voltage sensors you could monitor how high is the plane and capacity of the battery. And if you update software, you could monitor RSSI.

    Comments
    Show Original
  • eygll
    TR
    07/02/2021

    Desired feature at a reasonable price

    Comments (2)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$73.59
    • US$282.99
    • US$9.99
    • US$32.19
    • US$16.49
    • US$131.55
    • US$35.99
    • US$71.09
    • US$10.99
    • US$150.99
    • US$4.99
    • US$21.75
    • US$29.69
    • US$31.67
    • US$11.99
    • US$218.90
    • US$68.24
    • US$425.99