Customer Reviews

4.62 out of 5
See all 90 reviews
Write a Review
  • All Reviews (90)
  • Image (8)
  • Video (0)
  • All Star
    • All Star(90)
    • 5 Star(74)
    • 4 Star(5)
    • 3 Star(6)
    • 2 Star(3)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
Show Original

A part of the review has been auto-translated.

  • 11/01/2021

    I received the controller today. It looks good, but I haven't tested with the engines yet. However, I soldered the USB cable to the test and I flashed the firmware to newest version without problems. Looking from the front of the socket the wires should be [GND(black)] [Data +(green)] [Data-(white)] [+5V(red)] as in the picture I added. It has easily connected to Taranis X9D+ and reads all channels and position from gyroscope correctly. Additionally I soldered the capacitor on battery input.

    Comments (16)
    Show Original
  • 14/11/2020

    bought the flysky version. before you buy this, please read the reviews by buyers, especually on issue of the micro usb port via jst type head. for me, i dont like to solder into the fc board, so i diy the usb cable using the correct size jst i bought specially for this purpose. i actually bought a few sizes because i was not sure which one will fit. once i managed to connect into betaflight, after all those com port issues, and done flashed latest version firmware, then the rest of the steps including binding with my jumper t8sg was easy. flight is good and stable with racerstar 8520 motors from banggood. i used an eachine m80 85mm frame which is too big and does fit. i just secure the FC with cable ties and hot glue. will buy different frame later. still waiting for other parts ie vtx camera for my fpv. recommended buy.

    Comments (4)
    Show Original
  • 14/02/2018

    I got 2 bad quads in a row that had DSMX receivers, so Banggood, at my request, sent an FC with a Frsky receiver since he DSMX units were not good. SUCCESS! I now have a flyable QX-70. Thank you Banggood for the replacements, you went above and beyond on this order.

    Comments (1)
    Show Original
  • 19/12/2020

    Used for my micro quad, it has an integrated Flysky receiver, very stable, it is configurabile with betaflight/cleanflight, but you need the cable. I share my build info: -F3 Evo Brushed 3.7V -Racerstar 8520 brushd motor X4 -3.7 600mah lipo battery -3D printed frame Total weight is 63grams(3D printed prop guards included).

    Comments (2)
    Show Original
  • 17/04/2021

    Hibátlan állapotban kaptam meg a csomagot. Még nem szereltem össze a drónt, így nem tudom egyáltalán működik-e. Remélem jó, úgyhogy egy ajánlott minősítést megelőlegezek neki.

    Show Original
  • 29/03/2021

    thank you

    Show Original
  • 16/05/2021

    It.s OK, but come with old Cleanflight version, so better to flash Betaflight (3.5.7 OK). Non standard USB port.

    Show Original
  • 05/04/2021

    bien reçu. conforme à la commande. a essayer.

    Show Original
  • 24/08/2021

    Best FC for the money but be prepared to do a bit of micro soldering while setting up the motors (if you don't have the right plugs) once setup it flies great.

    Show Original
  • 25/11/2021

    very good

    Show Original

    Total 0 pages

    Go to page

    recommendation for you
    • US$3.99
    • US$9.99
    • US$2.99
    • US$10.65
    • US$7.99
    • US$12.99
    • US$11.64
    • US$16.90
    • US$8.99
    • US$8.46
    • US$7.99
    • US$9.67
    • US$409.99
    • US$6.99
    • US$63.99
    • US$21.99
    • US$116.59
    • US$6.04