Customer Reviews

4.87 out of 5
Write a Review
  • All Reviews (671)
  • Image (97)
  • Video (10)
  • All Star
    • All Star(671)
    • 5 Star(617)
    • 4 Star(37)
    • 3 Star(9)
    • 2 Star(2)
    • 1 Star(6)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 12/08/2020

    I got the box a little banged up, but the drone's in good shape. So far i'm satisfied

    Comments
    Show Original
  • 25/04/2021

    Super copter. Hält viel aus. Für einen Anfänger sehr zu empfehlen

    Comments
    Show Original
  • 07/09/2020

    It's all right, but it didn't bring any bayeria or charger. I think that's included.

    Comments (1)
    Show Original
  • 09/03/2021

    Received in just 1 week! Amazing, really satisfied with the delivery.

    Comments
    Show Original
  • 09/01/2021

    everything execellent. order on 2/1/21, recceive on 9/1/21.

    Comments
    Show Original
  • 01/03/2021

    set with fs-i6ab in two hours. OK test. next test flies.

    Comments
    Show Original
  • 14/10/2020

    Everything's working great

    Comments
    Show Original
  • 21/07/2017

    I pre-ordered on 12th of July. Expected restock 31st of July. 24h later I received a shipped notification. Yesterday exactly a week later it arrived! Unfortunately my receiver is still in transit so I cannot do a full review but so far all is quite good considering I do want to improve stuff myself and tackle known issues beforehand ;). The package was undamaged and complete. As noted in previous reviews the motor screws need to be secured with locktite done that. All spin smooth except one smooth but one bearing makes a little noise. However when it runs you hear no difference.!With the stock props the LH front side can clip the frame as noted by others. The solution is simple loosen the bolts on the arm a bit and slightly reposition the arm outward. There now is a 1mm gap on both sides between the blades and the frame. I know stuff like this should not be necessary but for the price I don't mind doing some tuning myself. Next is the VTX: As I don't want the side plates anyway I decided to do some improvements. I changed the mounting of the antenna to make it less vulnerable and rotated the VTX 90deg clockwise. Also I removed the hot glue and made the pigtail stronger with a dab of solder and a piece of heatshrink. I also put some Styrofoam in between the antenna disks to make the antenna more crash resistant. Finally I secured the motor wires with tiewraps to relieve stress on the ESC's because of the missing side blades. Next I set up beta flight and tested the ESC's and motors. All works as advertised. Besides some tweaks I found out that the flight controller has indeed a barometer. I enabled it and have working altitude display on my OSD. Tested it and when moving the quad up and down 1 meter you see the altitude change accordingly. Nice! The waiting is now for my receiver to arrive to test the last bit. But so far so good! (if you don't expect a ready to fly) ;)

    Comments (2)
    Show Original
  • 09/07/2017

    Avis de débutant. Version ARF. Emballage un peu abîmé mais pas de conséquence. Démonté pour vérifier s'il y avait malfaçons (soudures composants etc.) aucun problème. A Points à corriger: plaques sur les côtés et au dessus d'1mm fragiles (sauf cam) notice inutile pour la version ARF clés plates inutiles elle ne correspondent à aucun écrou sur le quad. Point négatif: pas d'écrous sur le VTX un crash ou un retournement et la carte sort des entretoises. Aucun problème j'ai hâte de commencer !

    Comments (4)
    Show Original
  • 05/07/2020

    arrived at my location in Mexico in less than 30 business days, it has several details the most important is the vtx that is not the one that I was specified however it has the same characteristics besides the antenna I found quite simple and fragile finally the box of the product arrived a bit battered but all good, It is a good product that I recommend to get started in the hobby and I really liked its presentation.

    Comments (4)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • AU$518.03
    • AU$123.28
    • AU$166.22
    • AU$443.24
    • AU$202.22
    • AU$272.74
    • AU$373.95
    • AU$365.67
    • AU$408.03
    • AU$166.38
    • AU$190.14
    • AU$1,689.75
    • AU$595.60
    • AU$491.22
    • AU$143.49
    • AU$269.37
    • AU$609.45
    • AU$6.91