Eachine Tyro69 105mm F4 OSD 2.5 Inch 2-3S DIY FPV Racing Drone PNP w/ Caddx 1200TVL Camera
Upgrade:
1. Motor has bigger bearing than before and with silicone cable
2. The camera and VTX are separate. NOT AIO as before.
3. Upgrade The flight controller.
Click here to buy Spare Parts.
Notice:
1. This is the DIY version that comes unassembled.
2. Comes without battery, charger, receiver or radio transmitter.
Specification: ( Manual)
Brand Name: Eachine
Model: Tyro69
Item Name: 2.5 Inch DIY FPV Racing Drone
Version: PNP ( Without Receiver, Battery and Radio Transmitter)
Drone Wheelbase: 105mm
Arm Plate Thickness: 2mm
Max. Propeller: 2.5 Inch
Material: 3K Carbon Fiber & 3D Printed TPU Parts
Weight: 47.9g ( without battery)
New F4 Flight Controller |
Brand Name: Eachine Item name: F4 Flight Controller Main control chip: STM32F405 Gyro: MPU6000 Input Voltage: 2-4S Lipo Black Box: NO Barometer: NO Firmware: VGRC/VGOODRC OmnibusF4 F4 Buzzer Interface: YES Betaflight OSD: AT7456E UART6: RC UART5: DJI UART2: VTX Weight: 3.6g PCB Size: 24.6x24.6mm Mounting Hole: 20x20mm - Support PPM, IBUS, SBUS, DSMX Receiver |
Eachine 20A BL_S 4In1 ESC |
MCU:48MHz EFM8BB21F16G Input Voltage: 2-6S Con. Current: 20A Burst Current: 25A (10S) BEC: NO Size: 28.7x30.7mm Mounting Hole: 20x20mm Weight: 24g Support DShot150/300/600, PWM, OneShot125, OneShot42, MultiShot ( DShot600 in default out from factory) |
Eachine 1104 8600KV 2-3S Motor |
KV: 8600KV
Lipo cell: 2-3S
Weight: 4.3g
Color: Orange Max. Con. Current: 13A Max. Con. Power: 144W Configu-ration: 9N/12P Motor Resistance: 137mΩ Stator Diameter: 11mm Stator Thickness: 4mm Motor Diameter: 13.8mm Motor Body Length: 11.5mm Overall Shaft Length: 17mm Bolt Holes Spacing: 9mm Bolt Thread: M2 |
65mm 2-Blade Propeller |
Item Name: 65mm 2-Blade Propeller Shaft: 1.5mm Quantity: 10 CW & 10 CCW Color: Transparent Black / Black/ Red ( Sends Randomly ) |
Caddx Beetel V2 1200TVL Camera AIO VTX |
Output Power: 25mW Channel: 48CH Input Voltage: 2.9-5.5V Support SmartAudio VTX Size: 15x14mm |
Image Sensor: 1/3 CMOS
Horizontal Resolution: 1200 TVL
TV System: PAL
Image: 4:3
Lens: 2.1mm
Dimensions: 14x14x16mm
Weight: 4.1g (Camera + VTX)
|
|
Recommend Lipo Battery ( Not Included) | Recommend 3S 350-450mAh Lipo Battery |