Operation:
1. The menu Settings
- Short videos, click the CS2 key end video, long press the CS2 again can enter the Settings menu function
Long press CS2 again can exit menu function set to return to the main page
- Quit video, enter the menu function keys need short press + long press CS2, CS1 and CS3 choose for scroll
up and down keys.Long click CS2 can exit menu to return to the main page
2. Video recording
- Insert SD card boot default automatic video, short press the CS2 key end video, short press the CS2 key again for the next round of video
3. Video playback
Long press CS1 enter the video play page, CS1 and CS3 choose for up and down keys,
CS2 button to play and pause,then long press CS1 can exit play video reverse back to the main page
4. Adjust the power operation
- Powering on the vtx, blue LED display 0, indicating the vtx is powered on, but it is in off status without
any transmission
- Short-press the button to change channel (CH), digital display will change synchronously. Digital display
changes cyclically from 1 to 8
- Long-press the button for 2 seconds until digital display flicker. Then short-press the button to
change the frequency band (FR), digital display will change synchronously. Digital display changes
cyclically from A b E F r U o L H
- Long-press the button for 5 second until digital display flicker.
Then short-press the button to change the power, 25mW/50mW/200mW (one hyphen stands for 25mW,
two hyphens stand for 50mW,
and three hyphens stand for 200mW)
- 5 seconds after setting, CH, FR and power will flicker alternately
NOTICE: The vtx has memory for settings. To change the settings, please repeat steps as above
,
