DASMIKRO Mini-z Brushless ESC For Independent Frame
A part of the review has been auto-translated.
Great ESC with high punch that will start any 1410/1625 size motor with ease. It works with Surpass Rocket 3500KV without any cogging although starting speed is quite high but can be tune it via programming. It's essentially PN Racing ESC so that's not a surprise. It comes in black shrink wrap so you might need to cut it off to see the button for setup. It comes with standard JR plug for receiver but no capacitor. You'll have to solder motor plug/wires and battery wires yourselves. Out of the box it's for using with 2S lipo. You'll have to bridge something on the board as in the photo description to use it with 4xAAA. Wiring is quite confusing on here so follow the photos below, if they don't show then follow this (Black) Motor A, (Black) Battery Ground, (Black) Motor B, (Red) Battery VCC, (Black) Motor C. You can program it with the button on the board or you can use Hobbywing programming card for more convenience. Highly recommended!
It's so good that I bought another one. I have my 1st review here somewhere and you can see the wiring on that.
Received the latest version. Please note that all cables from the ESC are not installed and must be soldered
this seller is underdeveloped! He's very stupid. I asked him if the goods would come to me like the picture. He said yes. It came not clear what, with some wires. I do not recommend buying!!!!
Article reçu conforme comme présenté par BANggOOD. Je n'ai pas encore effectué les connexions (pas encore utilisé). Merci BANggOOD.
very good. as recommended by the beaver man to use for 1410 motor. much better then the surpass hobby aluminium body esc and there is no more cogging issues anymore.
good and cheap esc
really good esc!
It works perfectly
works great.