Customer Reviews

4.97 out of 5
See all 39 reviews
Write a Review
  • All Reviews (39)
  • Image (8)
  • Video (0)
  • All Star
    • All Star(39)
    • 5 Star(38)
    • 4 Star(1)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 23/08/2021

    First test was positive. I printed a 5cm high Vulpix Pokemon which I modeled and used the Lychee slicer to slice and had to use a own USB pen drive as it didn't come pen drive inside the packaging. But I believe it's possible to place the brackets on some slicer and then open the stl on the halot One's own slicer. This should allow you to send straight from the pc to the printer through her WIFI. First test was positive. I printed a pokemon Vulpix with 1.5 cm height that I modeled and used the Lychee to slice and I had to use the USB flash drive myself because there was no flash drive inside the package. But I believe that it is possible to put the supports in any book and then open the stl in halot One's owner book. This should allow sending it directly from the pc to the printer through its WIFI.

    Comments
    Show Original
  • 10/07/2021

    Shipping was very fast and the printer arrived in great condition. The product was taxed, but at the time of purchase I opted for Banggood's fare insurance and it's going all right to receive the refund. The Banggood customer support team is very good, responds quickly and resolves. As for the product itself, it's a great printer, but it's still in the software development phase. Even so it is the best cost benefit in the market for a 3D printer with mono LCD with 2k resolution. Would recommend!

    Comments
    Show Original
  • 26/10/2021

    Had given up trying to bend a LD-002H to my will..fitted a proper LED driver, masked the LCD with copper tape etc. Still had UV bleed through forming skin and artifacts in the vat which affected the print. next step was a new LCD, still with no guarantee of success. I ordered the Halot as I still have faith generally in Creality, I have 5 of their printers. Out of the box, performed flawlessly ! EXCELLENT quality prints. 1. First, update the firmware to the latest version. Much better than the version supplied. If you can't see the wireless upgrade option, the firmware is just to early. Download from Creality and use the stick. 2. DO NOT look for LED time, base layers etc. in the software. This is all done on the Halot itself. You don't have to bake these settings into the model files now. At first I thought WTF... then very quickly realised sooo much better. 3. There is no calibration card, no matter how many times you pull the packing apart :D . use a piece of A4 paper, after removing the protective plastic, unlike the video... Still a messy way to make models, but the results are awesome !

    Comments
    Show Original
  • 07/07/2021

    Beautiful and functional! I did not receive the USB drive, however this did not prevent the operation as the content is on the site. He doesn't have much information about how HALOT BOX works on the internet (slicer software) but he is very intuitive and the first impression was satisfactory.

    Comments (2)
    Show Original
  • 20/09/2021

    this is a great printer, the detail is very good!

    Comments
    Show Original
  • 19/09/2021

    Excellent low cost resin printer! Really satisfied!

    Comments
    Show Original
  • 14/09/2021

    Nice at first looks, haven't got the time to test it yet

    Comments
    Show Original
  • 25/08/2021

    Quick Reception!

    Comments
    Show Original
  • 05/11/2021

    I have 2 LD-002r printer, then i bought this. although it has better parameters, i like the 002r better. cons: -It is only compatible with its own slicing software (halotbox), if you wanna use with chitubox, you have to convert your files -the wifi worth nothing (you can copy files, but i cant find it after:)) -you can only copy files to the root of the usb stick (cant handle folders) -the motor is SUPER silent, but the FAN is noisy like hell. -there is no sensor for the safety glass (the cheaper model has!) -I think the safety glass doesent filters UV (because the resin starts to cure by itself, if I left there, In the 002r, i left for days the same resin but nothing happend) So I reccomend buying a 002h!

    Comments
    Show Original
  • 13/10/2021

    there was an issue with buildplate alignment, the design of the alignment mechanism does not tolerate very fine differences left and right, that needed the whole carriage to be loosened and tighted back in place to get it straight. The creality software surely needs more development, but still with patience it gets the job done Everything else works as advertised, very fine prints!

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • AU$536.89
    • AU$428.09
    • AU$266.31
    • AU$28.62
    • AU$571.27
    • AU$227.65
    • AU$1.80
    • AU$75.01
    • AU$81.78
    • AU$6.99