BSIDE ESR02PRO Digital Transistor SMD Components Tester Diode Triode Capacitance Inductance Meter
A part of the review has been auto-translated.
Great ESR Inductance, Resistor, Cap and more Meter, a must have to test if the caps are ok, and MUCH more, it is VERY accurate, tested the ohms with a Elenco RS-500 and a calibrated Fluke 179 True-RMS Digital Multimeter, and the BSIDE ESR02PRO is also calibrated great, it graves almost all the same numbers as my Fluke 179. I would recommend everyone this ESR Inductance, Resistor, Cap and more Meter, but be careful with the Plug-in device test seat, they can only be used with caps with normal small pins, use the external pen holder holes for the big caps and more. I put a BSIDE ESR02PRO Typical ESR Value Of Electronic Capacitor unit paper with the photo's, so that you don't have to turn the BSIDE ESR02PRO around all the time to see what ohms the caps must be your testing.
Excellent testing device very precise device for this price.
Ottimo misuratore di componenti elettronici, utilissima la possibilità di misurare componenti SMD oltre agli SMT. Strumento ben realizzato, con plastiche di buona qualità e rifinite. Questo strumento possiede inoltre la possibilità di connettere puntali tramite connettori a banana per misurazioni a distanza dallo strumento senza utilizzare le feritoie/pads di contatto sullo stesso. Schermo retroilluminato con luce bianca. Strumento sicuramente consigliato.
Detecting the type of the electronic components correctly. Measures parameters accurately enough. Well packed. I recommend.
A small tool but it has powerful kungfu to fight again electric devices. Thanks Bangood. Recommend for buying. But selling without probes.
It arrived OK. The box was pressed a little. Excellent for component inspection. The BC537 transistor is indicated as n-jfet on the LCD. Single and double pinch contacts are a bit difficult to operate. SMD contacts are good to use. They do not provide a short test lead for the three banana sockets, so I had to make one myself, because the larger components cannot be connected to the small sockets without damaging the instrument. Discharging the capacitors before measuring is very important in the socket with each signal, because the instrument may be damaged. In the massive case, we get an easy-to-use device.
Very useful meter. Identifies and measures all kinds of components. The fast C+ESR function is particularly useful if you are replaceing bad caps.
Excellent product, exactly as the description says. Thanks for the good service
Very good tester for transistor and other components.
I used to buy, assemble and use a kit with a case. This time, I had to measure the SMD part, so I bought it. The measurement buttons on the left and right are useful for measuring while holding down the SMD part. There is also a capacitor discharge circuit that was not available in the previous kit, which makes it convenient for measuring electrolytic capacitors. I'm happy with my purchase.