Customer Reviews

4.71 out of 5
See all 21 reviews
Write a Review
  • All Reviews (21)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(21)
    • 5 Star(16)
    • 4 Star(4)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 17/11/2020

    It performes very well. Connections are robustly built. no hiss or krackle when On, but not connected. I used 12V@1,5 amps on 2x 8ohm shelfspeakers. filled the room pleasingly.

    Comments (1)
    Show Original
  • 09/02/2021

    Super works well. Great!!!

    Comments
    Show Original
  • 09/11/2020

    It is smaller than I expected but the output power is not small. I have only connected it to a pair of Cambridge Audio satellite speakers and the high-frequency response seems quite decent, however, the mid-range and bass are not performing well.

    Comments (1)
    Show Original
  • 03/08/2021

    It is OK. I would rate it at 2 x 10 W into 8 ohms with a 24V supply (2 x 2.5 W with 12V) before it starts distorting too badly. But that's what the data sheet for the TPA3116D2 says, so it's fine. 1 Watt is normal listening power anyway in most houses or apartments, with most loudspeakers, so 10 Watts is plenty. I was unable to get it to switch to 3.5 mm line input (this is supposed to be automatic), so I have only tried it with bluetooth. The sound is fine. There is some noise (hiss) when the volume control is turned up high, but again that is expected with the TPA3116D2. I have not tried the USB DAC input, so I don't know if that works. The LEDs are too bright, and there is no way to turn them off. It would be nice if I could get into the case to modify them. (The power consumption with no input is higher than I like, probably because of the LEDs.) It takes a while to learn how to use the rotary encoder as a volume control. An ordinary potentiometer would have been better than a rotary encoder. So yeah, it is OK. Does the job.

    Comments
    Show Original
  • RoyErez
    IL
    11/02/2021

    Surprisingly good sound. Lights are slightly annoying. volume control is weird. great if you use it only for amplifying and control the volume in the sound source.

    Comments
    Show Original
  • 14/06/2021

    The amplifier arrived in intact packaging and in very good condition, it works fully satisfying and amiable looking 😎 Thank you, sir.

    Comments
    Show Original
  • 30/03/2021

    Hobestly, plug 24v into this thing and call it good. Not the loudesnt amp ever, but for the price, the best looking smallest one ever. Its tiny, but even the extra leds act like a vu meter. Absoluterly amazing product.

    Comments
    Show Original
  • 08/04/2021

    Mighty audio amplifier. just connect two loudspeakers. Pitty that one cannot switch off the leds, but anyway ....

    Comments
    Show Original
  • 01/03/2021

    Very stylish, simple and practical to install. It works very well, but it does not reach 50w*2.

    Comments
    Show Original
  • 17/11/2020

    functional and good price.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • AU$153.19
    • AU$50.50
    • AU$135.09
    • AU$98.04
    • AU$222.83
    • AU$91.91
    • AU$733.86
    • AU$1,120.40
    • AU$181.05
    • AU$229.80
    • AU$50.68
    • AU$151.67
    • AU$143.39
    • AU$66.17
    • AU$61.27
    • AU$83.33
    • AU$116.45
    • AU$18.09