700TVL 1/4 Cmos 1.8mm 170 Degree FPV Camera NTSC/PAL 3.7-5V for RC Drone FPV Racing
It is inexpensive, small and lightweight camera. It is particularly suited for small RC models with a 3.7V power supply. It works with the transmitter Eachine VTX02 Super Mini 5.8G 40CH 200mW. I use it on my Wltoys A959 Rc Car 1/18 2.4GH 4WD Off-Road Buggy. It's super fun.
Долго адаптируется после засвета ярким солнцем а так вполне нормально для дешёвой камеры
Piccolissima ma bella,ideale per installarla sul mio biplano per FPV......pesa quasi niente,sul motante alare ci stara' benissimo senza influenzare la stabilita'.......
小型軽量で逆光にも強く、画質もそれなりに良いので気に入ってます。 今迄も色々な機体に載せて来ましたが、今回は改造Acro-Whoopに搭載してみました。 これからも色々な機体で使用して行くと思います♪
I ordered two NTSC cameras last year, and they function fine with NTSC video out. An example of one of those cameras (that function as NTSC) is shown on the right in the attached image. I ordered three NTSC cameras this year, but all three are configured as PAL. An example of one of those cameras (that function as PAL) is shown on the left in the attached image. All three camera boxes that I received this year were marked NTSC, but all three cameras inside had this jumper set to the PAL configuration. This
A câmera veio em perfeito estado, e chegou normalmente. Veio dentro de uma caixa com materiais para proteger contra possíveis choques no transporte. Veio com uma pequena tampa protetora para a lente também :)
Far superior contrast stability to the cheapy 600TVL sold on BG slightly cheaper but not as good as the 1000 TVL they list here: http://www.banggood.com/1_2g-Super-Light-1000TVL-14-CMOS-2_8mm-Lens-FOV170-Degree-Mini-FPV-Camera-p-1110381.html?p=UI14032168777201508N
Good product . Very small. Good packaging. Good wire length.
Good camera for the price.. overall am happy but would recommend changing to silicon wire if you have some arround. Have a video a bit long: https://youtu.be/Vjp0qRrsWHU
The instructions given are not clear. According to the manual included, the working voltage can go up to 12V, which is a no-no! It works only from 3.7V up to 5V! Take note.