Customer Reviews

4.95 out of 5
See all 96 reviews
Write a Review
  • All Reviews (96)
  • Image (7)
  • Video (0)
  • All Star
    • All Star(96)
    • 5 Star(92)
    • 4 Star(3)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Australia)
|
Show Original

A part of the review has been auto-translated.

  • 03/06/2015

    These are wound on a YELLOW ferrite core of T50-6, which is active in transformation within 3 - 40 MHz. As a intended choke the active region is from DC to some 30 MHz. Wound with about 2.7 m enamelled CU-wire; some 157 turns. Tested 3 in my 10pcs batch, and they were all 98 - 102 µH. A good performer. Happy buyer.

    Comments
    Show Original
  • 20/12/2021

    Well packaged, received in good condition and very fast delivery time (7 calendar days from order). Most of these tested at 100uF (photo 2), but a couple tested at 90uF (photo 3), which is within the expected range, but a reminder not to rely too much on nominal values. I find these useful items to keep in my hobbyist electronics lab, especially when I am playing with dc-dc converters for solar power, etc.

    Comments
    Show Original
  • 05/08/2016

    They are almost all at 100uH which i was not expected.The unexpected was their size which turned out to be really small.

    Comments
    Show Original
  • 02/10/2021

    10pcs of high-current coils for DC/DC.

    Comments
    Show Original
  • 08/10/2020

    Good value for money

    Comments
    Show Original
  • 15/03/2016

    Inductance (for all ten) is well within specs (two are 97.8 μΗ, all the rest between 99,8 and 102.8 μΗ). To measure them I used a dedicated L/C meter, which has two scales, one for small inductance values, and one for large ones. My MASTECH MS8222H multimeter - which can also measure inductance – in the lower range of 0-2mH gives lower values compared to the ones obtained from the dedicated L/C meter, while for higher values both instruments give almost the same reading. Having checked both instruments with some small coils that had a label with their exact inductance value , I now trust the dedicated one. Exactly like other reviewers have said, for the 6A nominal current I was skeptical, so I decided to measure one of them. Well, the result was above my expectations. After 30 minutes at 3 Amperes DC, it had stabilized to 61 degrees Celcius, which I think is more than acceptable (see photo). I would push it a little further, if my power supply could give me more current, as I guess it can go up to 4 Amperes without problem. Concluding, 10 nice inductors for a very nice price. So, another 5 star. Thank you, Banggood.

    Comments
    Show Original
  • 05/09/2015

    Wire Diameter is only 0.55mm, you'd better not use it over 1.5A, but at this price, who cares?

    Comments
    Show Original
  • 24/01/2021

    exactly as described and fast delivery! 👌

    Comments
    Show Original
  • 10/12/2018

    low price and good accurate 6A seems to be a bit optimistic !

    Comments
    Show Original
  • 16/10/2018

    They are nice but look small. Anyways, handy to have some of these. Great for making lc filters.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go
    recommendation for you
    • US$6.99
    • US$3.29
    • US$1.25
    • US$7.57
    • US$12.38
    • US$1.53
    • US$20.92
    • US$14.68
    • US$3.60
    • US$16.49
    • US$5.49
    • US$8.99
    • US$14.29
    • US$8.22
    • US$6.99
    • US$4.39
    • US$1.63
    • US$3.16